©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

mukhalad · 02-02-2018

Hello, how are you  I am having an issue with a build.The board is an z270 ROG MAXIMUS IX HERO.CPU is a intel i7700k.Ram is Gskills 64GB 3600 MHZ , 17-19-19-39https://www.gskill.com/en/product/f4-3600c17q-64gtzrWith the bios at default, and ram at 2...

mukhalad · 02-07-2018

Silent Scone wrote:Try with 3200 ratio. To reiterate what has been said already, you're asking a fair amount of the memory controller. If you need to make a few concessions to use the kit, there's no harm in that.Hi, thank you.I tested with 3000, 320...

mukhalad · 02-05-2018

Silent Scone wrote:Try both Maximus Tweaker Modes 1 and 2. Either mode may well help the system pass training. As Mentol has stipulated already, kits of this density can be tough on the memory controller. VCCSA and IO voltages may need to be dialed i...

mukhalad · 02-04-2018

Menthol wrote:3600mhz of the capacity you have 64GB is tougher on the CPU memory controller then a 16 or 32 GB kit.You may need to manually enter dram, VCCIO and VCCSA voltages, this is common when using memory kits of this speedTry 1.38v to 1.4v dra...

mukhalad · 02-04-2018

MikeAdu wrote:Try to raise MHz step by step and see where is the limit.Check also System Agent Voltage,maybe it is low.I tried but I got same results

mukhalad · 02-03-2018

I tested it with the manual set but I got the same results.

User Statistics

User Activity

My PC won't boot with DDR4 G.Skills 3600mhz (xmp)

Re: My PC won't boot with DDR4 G.Skills 3600mhz (xmp)

Re: My PC won't boot with DDR4 G.Skills 3600mhz (xmp)

Re: My PC won't boot with DDR4 G.Skills 3600mhz (xmp)

Re: My PC won't boot with DDR4 G.Skills 3600mhz (xmp)

Re: My PC won't boot with DDR4 G.Skills 3600mhz (xmp)