It reads like a bad riser cable, but I based on your description it seems like you were directly connected originally so that would be out. I don't see anything you've missed checking. Very odd.ApolloEleven wrote:If we install a Hypercard at the ve...
Like the poster above, I can confirm all 3 board M.2 slots in use + GPU in PCI-E slot 1 is still x16. Is it possible you changed one of the BIOS settings for PCI-E or nvme management?Also curious if you get the WHEA PCI-bus errors with all three slo...
I find myself in the same position on the Formula XI and 1502. 9 months of stability replaced by incessant crashes and hotter CPU temps with less voltage after dropping back two rungs. Went back to 1401 relatively quickly, but it is jittery now the...
Likely not the CPU fan or OPT headers. "CPU Fan" is a standard recommendation across multiple cooling types since you will get a boot error if there is no signal detected on CPU fan. The problem with doing this with a standalone D5 or DDC pump is y...
Both of the Corsair monitoring programs (Link and iCUE) have difficult reading the Asus Embedded Controller. It is pretty standard to get junk values and/or duplicates. That makes those programs not very helpful for monitoring motherboard specific ...