©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

fatboynuke · 06-13-2018

Hi everyone,I've searched for similar issues on the forum but I couldn't find anything aboutthis specifically.I have a new i7 8700k, corsair vengeance CMU32GX4M2C3200C16R (2X16) KIT and ASUS Maximus Hero X (wifi).The system boots without issues and w...

fatboynuke · 07-02-2018

So, good news.I decided to focus on the RAM. It looks like reverting back from XMP settings to AUTO solved the issue. Now the system successfully boots from cold start with both RAM modules and especially with the speed I expect from it.So most likel...

fatboynuke · 07-02-2018

That's almost fully correct I RMA the mobo and they noticed the bent pins, and they sent it back to me. I tried and fix the pins and now 2 modules work but just if I reset after a cold start.only then I have a successful boot.As far as I can see (wi...

fatboynuke · 07-02-2018

I'll try for sure but the faulty RAM module was ruled out in the first place as I was able to use both with no issues when swapping them.

fatboynuke · 07-02-2018

Hi , I have not yet tried moving the ram modules around after 'fixing' the socket pins.When the boot fails and I get the A2 error I have no screen message at all, it turns off as it detects no output.Currently I have a sata SSD, an nvme M2 in the 2nd...

fatboynuke · 07-01-2018

I tried checking all connection and everything looked ok, but no change. Then I removed one RAM module and here we are again, the system boots with no issues and very fast.Back on 2 modules I have to reset after some time when it stucks on error A2 a...

User Statistics

User Activity

Maximus X Hero (Wifi) not booting with 2 RAM modules - no issues with 1

Re: Maximus X Hero (Wifi) not booting with 2 RAM modules - no issues with 1

Re: Maximus X Hero (Wifi) not booting with 2 RAM modules - no issues with 1

Re: Maximus X Hero (Wifi) not booting with 2 RAM modules - no issues with 1

Re: Maximus X Hero (Wifi) not booting with 2 RAM modules - no issues with 1

Re: Maximus X Hero (Wifi) not booting with 2 RAM modules - no issues with 1