©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

PeskySnowman · 07-06-2018

Is there anything I can do to speed things up? My OS is installed on a SSD. With no external drives connected launch is quick.

PeskySnowman · 06-26-2018

I have a Crosshair VII x470 board, and a Fractal Design Define R6 case.I have the wraith prism plugged into the CPU_FAN connector on the motherboard.My case comes with a PWM Fan hub, and the manual for it said to plug it into the CPU_FAN connector, s...

PeskySnowman · 02-06-2023

Have had this problem for a long time where having external storage connected by USB would lead to slow boot on my Crosshair VII x470 board. Interesting to see that the problem is still present on the 500 series boards. Must be an Asus thing.

PeskySnowman · 06-28-2018

Delta9K wrote:Yes, in your setup use one of the CHA_Fan headers. I did the same in my R6. I have three roof fans mounted for top exhaust and I plug those into the builtin fan_hub using the PWM (4pin) connectors and then connect the 4 pin PWM lead fro...

PeskySnowman · 06-26-2018

Rob W. wrote:I think you will find cpu-opt is slaved to cpu fan so the one controls both,In that case since I just have case fans hooked up to the fan hub would I be better of hooking it up to CHA_Fan connector?

User Statistics

User Activity

Boot is slow if external hard drives are plugged in

Should I use CPU_OPT or CHA-FAN to connect fan hub on Crosshair VII x470?

Re: Booting is extremly slow when connected to mutiple external hard drives

Re: Should I use CPU_OPT or CHA-FAN to connect fan hub on Crosshair VII x470?

Re: Should I use CPU_OPT or CHA-FAN to connect fan hub on Crosshair VII x470?