©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

Antary · 09-12-2018

Hello.My configuration: CPU is i7 8700K.Motherboard Maximus Hero X.Ram DDR4 Ballistix Elite 16GB Kit (2 x 8GB) DDR4-3466 UDIMM BLE2K8G4D34AEEAK Specs: DDR4 PC4-27700 • 16-18-18 • Unbuffered • NON-ECC • DDR4-3466 • 1.35V • 1024Meg x 64I updated the bi...

Antary · 09-13-2018

Phillyflyer wrote:When you take the board out for RMA....check the back of the board for any scratches from the standoffs that may of occurred during installation....it's possible that if there is..it could be causing a short in the boards ram slots....

Antary · 09-12-2018

NemesisChild wrote:There's the problem. Others have reported the same issue here in the forums.I suggest contacting ASUS support and have them initiate an RMA for a replacement board.I think the problem is that I can't applying dram voltage more than...

Antary · 09-12-2018

Phillyflyer wrote:Have you tried enabling XMP with just (1) stick ....(Tweak Mode 1 if supported by board) and manually applying dram voltage @ 1.35v with 3466 mhz ? ...Just throwing that out there cuz I've seen some boards that would not post at rat...

Antary · 09-12-2018

NemesisChild wrote:I suggest entering manual base timings, frequency, and DRAM voltage in the bios.Have you tried increasing the DRAM voltage? Or played with the VCCIO and SA voltages?Also you can try Maximus Tweak mode 1 or 2 under DRAM Timing Contr...

Antary · 09-12-2018

Phillyflyer wrote:Looks like the Ballistix Elite memory is not on the Asus QVL...Yes, but on another system with ASUS Prime Z370, this memory works with the stated characteristics of 3466 when you turn on XMP, but only stable with 3333.

User Statistics

User Activity

Can't use my xmp profile 3466mhz, won't boot.

Re: Can't use my xmp profile 3466mhz, won't boot.

Re: Can't use my xmp profile 3466mhz, won't boot.

Re: Can't use my xmp profile 3466mhz, won't boot.

Re: Can't use my xmp profile 3466mhz, won't boot.

Re: Can't use my xmp profile 3466mhz, won't boot.