©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

vinceX · 06-15-2019

A few days ago a new BIOS was released for the WS X299 Sage. After updating to this BIOS, I noticed a massive performance drop in every task, mostly related to memory.CPU: Intel i9-9960XMemory: F4-4000C18Q2-64GTZKK Flashed BIOS from EZ Flash 3 Utilit...

vinceX · 02-19-2019

Silent Scone@ASUS wrote:That's one of the many reasons it's not recommended to mix memory. Vendors bin these kits at the density they are sold in. The higher up the frequency spectrum you go, the less likely it is that mixing kits will work. 4000/413...

vinceX · 02-18-2019

Silent Scone@ASUS wrote:The memory isn't fully stable and is failing POST stress tests. Normally, this can be dialed out by tuning the VCCIO and VCCSA voltages. Alternatively, relax tRCD by one clockThanks for the suggestion, I tried the steps but I ...

vinceX · 02-18-2019

Would it be possible to run the DIMM.2 slot from the PCH bus instead and disable the third PCIE slot?

vinceX · 02-12-2019

I'm having the same issues on the latest BIOS, I'm using 2 * F4-4000C19-16GTZR (64GB) manually tuned at 3600mhz CL16. The BIOS won't post sometimes, but after a few attempts it'll work fine. The memory works also fine in Windows and passes 8h of memt...

User Statistics

User Activity

WS X299 Sage 10G - Memory issue with BIOS 1001

Re: Maximus XI Hero and G.Skill 4133 Mhz Cl19 booting problem

Re: Maximus XI Hero and G.Skill 4133 Mhz Cl19 booting problem

Re: Maximus XI Extreme Dimm.2 and pci lanes

Re: Maximus XI Hero and G.Skill 4133 Mhz Cl19 booting problem