Fixed.Yeah it seems that first manually setting the voltage then rebooting then setting DOCP is the workaround.EDIT: though the tighter timings have caused a failure to post, so using default XMP for now.
xeizo wrote:VBOOT DRAM Voltage setts itself too low, 1.2V, just change it manually to 1.35V and it will work as normal.When I selected DOCP the DRAM voltage was changed to 1.35.I tried upping to 1.4 but still no luck on the Standard 3200mhz profile. ...
So just plugged in the 3700XAll fairly standard settings, but engaging DOCP plunges it into SAFE post. This seems to be pretty common with the 5007 Bios.Anything reliable to fix this or is it just wait for the new BIOS to sort?
Getting very annoyed with QFan.Have 3 DC Case fans running on my fan controller, had pretty good control of the curve.Then I hit the Q-Fan auto tuning. Now it's ruined.The Min Duty Cycle is set at 60%, even though it was working fine at much lower ra...