When I set AMD fTPM switch to "Disabled"reboot, and check the TPM status, it always says enabled.I also have Trusted Computing disabled.Why can't the AMD fTPM switch stay disabled?
I have an Nvidia GeForce GT 710 (1GB) on slot 1 and Nvidia Grid K1 (16GB) on slot 3 of an Asus Prime X399-A, but at boot I get "BIOS is updating LED firmware. Do not shut down or reset the system to prevent system bootup failure."If I remove the G...
STARRAIN@ROG wrote:Is your Nvidia Tesla K80 booting normally and working fine with the seller's motherboard? They weren't able to process the return because I removed the heatsink cover. I'll try it on my friend's mobo. The Tesla K80 green light tu...
My Nvidia Tesla K80 24GB GDDR5 seems fine; lights on it turn on.When I first put the Tesla K80 in, BIOS posts; but when I reboot, I run into the "BIOS is uploading LED firmware" issue. The RGBs on the motherboard that I disabled in BIOS turn on somet...
STARRAIN@ROG wrote:They installed GT 710 on PCIEX16_3 slot and install ASUS-MINING-P106-6G on PCIEX16_1 slot, and boot successfully without the "BIOS is updating LED firmware" message.Was the GT 710 an x8 or x16 interface?
STARRAIN@ROG wrote:Do you mean your Nvidia Tesla K80 and Grid K1 are working fine with other motherboard?I'm having the seller of the Tesla K80 test it on another motherboard; I'll let you know if he says it functions or not.
STARRAIN@ROG wrote:Please check whether your Nvidia Tesla K80 and Grid K1 are working fine or not.I don't think the cards were functioning and that was the problem. Still, the Asus BIOS shouldn't freeze with non-functioning graphics cards, should it?