©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

Alessio088 · 10-12-2023

Hi all, Just hoping someone can help me here please. So I have a Maximus XI Code that been working perfectly with my ROG 4080, Now unfortunately I had to send my 4080 for repair as the power connector melted but that's another story. So I had my pc r...

Alessio088 · 04-22-2023

Hi all guys,Just wanted to ask a quick question and need some advice please.I have recently finished my all ROG pc,where all components are ROG branded,all apart from one the RAM.So I just wanted to ask if there are any compatible Aura RAM since it l...

Alessio088 · 01-24-2023

Hi guys,I'm planning on buying a Rog strix 4080 at some point this year.On the specs sheet I see that the 4080 wants a 1x 16 pin PCI connector.I currently have a 2080 super with a cable mod (pictures attached) 2x 8 pin PCI.I was wondering if I could ...

Alessio088 · 12-27-2022

Hi all and happy holidays first of all.So I had a strange issue today when I started my pc up after I replaced the case and the aio cooler.I had the pc unplugged for 2 days as I thought I'd do it properly and spend some time on it,I got a strix Helio...

Alessio088 · 10-15-2020

Hi all guys,Just got a couple of questions,I hope someone will be able to help me.So I'm interested in buying the Rog Thor 1200w PSU,I saw that it has got the aura option.Now I have already used one Aura port on the MB for the LEDs,Is there another p...

Alessio088 · 10-12-2023

Ok I will disable it again when my 4080 comes back then, Once again thanks a lot for your help.

Alessio088 · 10-12-2023

Yes CSM was disabled and I enabled it and is finally booting now from the 1080 thanks so much for your help. Anything you would suggest to do when I get back my 4080? Uninstall the 1080 drivers obviously before booting up the 4080 again and shall I d...

Alessio088 · 10-12-2023

Right so I've managed to have the 1080 plugged in and booting from the onboard I've downloaded and ran the firmware updater which found the 1080 and said that it needed updating so did that rebooted the pc and swapped the cable back onto the 1080 but...

Alessio088 · 10-12-2023

Ok I'll try that,does the 1080 need to be powered and inserted in the mb slot too? Because I'm not sure it will boot like that,I didn't try but I tried to disconnect the hdmi cable and plug it in the on board one but the display stayed black. Or if I...

Alessio088 · 10-12-2023

Thanks,yeah I tried different power cables already only need to try a different hdmi cable. Also tried a different pcie slot but same result Would the codes say anything to you? When it boots correctly via on board graphic card the qcode shows A0

User Statistics

User Activity

Maximus XI Code not reading GTX 1080

Rog or Aura compatible RAM

Rog strix 4080 and cable mod advice

Strange behaviour at first startup

Asus Rog PSU and water cooling question

Re: Maximus XI Code not reading GTX 1080

Re: Maximus XI Code not reading GTX 1080

Re: Maximus XI Code not reading GTX 1080

Re: Maximus XI Code not reading GTX 1080

Re: Maximus XI Code not reading GTX 1080