When I boot up the system, the cooler's RGB kicks in after a second or two, but when I wake it up, most times the cooler's RGB doesn't light up. Why is that?
With my new build I'm getting as far as this POST code before it stops, but I haven't a clue what OEM BDS is referring to. The monitor isn't showing a connection, so I can't get into the BIOS. Anyone have any idea what might be at fault?
USB-C needs to have PC Alternate Mode. You may need to install an extension card with a suitable port. The cable must also be capable of handling that mode. Cheap cables don't.
I've noticed that the case's light strip also doesn't light up, adding more weight to my suspicion that it's a mobo issue. (The case is a Fractal Design Vector RS.)
Ch3vr0n wrote:Considering you don't post WHAT cooler you have, and that you're in the wrong section (this is for motherboards), nobody knowsPerhaps because my initial thought is that the RGB is connected to the appropriate header on the motherboard a...
I'll have to settle for two sticks. The problem is the CoolerMaster MA410M cooler is impinging on the first slot. I installed the four sticks before installing the cooler, and I saw that the screw heads were pressing against the first stick, making i...