Hi!"How can I de energize the computer" - disconnect the power cord from the computer power supply and wait a little 10-15 seconds."What software..." - you will first boot to at least Windows with the specified memory settings on the package."XMP II"...
Hi! 1. Make sure both modules are in slots A2 and B2.
2. Update UEFI to 2102.
3. Try XMP II.
Contrary to assumptions, XMP/EXPO doesn't ensure automatic overclocking. Tighter timings or higher frequencies may require manual adjustments for stability. ...
Hi!First, you will collect everything, install memory, and then you will solve the problem if it arises. Start by installing two memory modules in slots A2 and B2. Start the system, enter the Bios, update the Bios to the latest version, then select t...
Hi!
1. Disconnect all sata cables from the motherboardif connected and disconnect everything from USB ports.2. Resets Bios settings.3. Roll back to the original Bios version.If nothing helps, most likely not the serviceability of the hub (Z790 chip),...