I built a new ROG system with the following:
ROG MAXIMUS Z790 APEX ENCORE
Intel 14900KS
Corsair DOMINATOR® TITANIUM RGB 48GB (2x24GB) DDR5 DRAM 8000MT/s CL38 Intel XMP Memory Kit
ROG RYUJIN III 360 ARGB EVA-02 EDITION
Thermal Grizzly - CPU Contact ...
My setup listed in the subject. I updated the bios to 506 and I still only get 5700 MHz with my cpu when native is 6.0 GHz for this processor.
Everything is set to default / Auto.
My memory (F5-8000J4048F24GX2-TZ5RS 96gb) should run at 8000 MT/s usi...
New build and it fired right up with no issues that I can see. However, I see Q Code 25 on the MB. Can anyone confirm that Q code25 is actually a error? My ROG MAXIMUS XIII HERO is running memtest86 just fine. I don't have Win11 installed yet, ju...
thanks guys, I appreciate the help in testing. I was within 3 days of being outside the newegg warranty to return/replace, so very glad we got to this point sooner than later. Dealing directly with intel would be painful I'm sure.
Decided to try CR24, it crashed the application, but not Windows.
I'm within my return policy at newegg, so I have submitted request to replace my cpu. After the replacement, I will start over.
Changed back to Typical and set loadline to level 5, CR23 crashed Windows after a few minutes.
Changed to level 6, and both r20 and r23 passed.
So the question now is, should I accept this performance or should I contact intel and rma my cpu?
Bad news.
Changed to Typical
Karhu ran for over 7 hours, over 11k%, no errors
TM5 passed with no errors
Intel processor Diag also passed. This test runs the cpu at 100%
Ran Cinebench CR20 and CR23, both crashed Windows BSOD. I took a picture of t...
