©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

Dridd · 08-11-2021

Just finished a new build with Zenith II Alpha. Boots off an NVMe drive. Everything perfect at first.Then I attached a 7" sidepanel display (runs AIDA64 sidepanel). Attached via display-port + USB for power and touch.Suddenly BIOS will not let the sy...

Dridd · 08-14-2021

The new GPU (plugging in 12 GB of GPU memory) seems to have fixed it so the PCI bus no longer gets blocked up, stopping NVMe access. (Which I still assume might be the problem.)She can now both cold and warm boot without unplugging the 4th display be...

Dridd · 08-13-2021

I have a vague theory that the difference between warm and cold boot could be caused by the GPU. A dummy I am using until the real one arrive.One difference between warm/cold boots is likely that on a cold boot, the GPU would only have one port enabl...

Dridd · 08-12-2021

I took the fact that the display is USB powered out of the loop by powering it from a dummy USB 5V source, unrelated to the system.Made no difference at all.. BIOS still thinks there is a problem with the boot drive if that 4th display is connected o...

User Statistics

User Activity

Really Odd boot problem with sidepanel status display attached

All better

Re: Really Odd boot problem with sidepanel status display attached

Eliminated USB Power from issue