Vcore per core

Hello

Does anyone have a tutorial on setting up vcore per core ?

Thanks

Quote:

---

Originally Posted by tistou77

Hello

Does anyone have a tutorial on setting up vcore per core ?

Thanks

---

Showed u a pic at oc.net, quite easy, select adaptive/manual/offset, with adaptive enter the turbo voltage and with the offset substract to maintain lower voltage. Manual is easier, just put the voltage for every core.

Using adaptive, to avoid unstability, u must disable c-states (or at least c6 which makes the system freezy), but u could use enhanced speed step or speedshift and a negative offset which doesn't go above 0.110-0.120. Gotta tune your voltages, including vmesh, uncore offset and vccio. System agent is not that important.

Thanks @vmanuelgm

Yes I had seen but I was mainly asking how to find the right vcore for each core ;)

Now, I stay in manual Vcore (the Offset is too important, more than 0.16v)

Yep, that is the real problem, going above 0.120 more or less, which makes the cpu fall too low in idle.

U should find a clock that doesn't need that high negative offset, in my case 4.9 is perfect!!!

It bothers me to put more than 1.20v for the Vcore to use Adaptive Mode, while it takes 1.15v to 4.7 :D

Besides, this 0.12v offset, how was it found ?
With tests ?

It is more or less the point in which the cores fall too much in idle and make the system unstable.