![ASUS Republic of Gamers [ROG] | The Choice of Champions – Overclocking, PC Gaming, PC Modding, Support, Guides, Advice - Powered by vBulletin](images/asus/rog_logo.png){kind=logo}
Ram issues I believe?
Printable View
-
03-11-2020, 11:20 AMbliv25Ram issues I believe?
Hi guys,
I hope all is well with everyone.
I have a few issues to raise if someone can help me out, really confused to be honest.
I have a Strix X370-F Gaming motherboard and Ryzen 5 1600, 16gb Vengence LED 3000MHZ...
I have had this computer for about 2 years now and all has been working fine to be fair although only recently I have discovered that my ram was running at 2133mhz. Checked this with CPU-Z, says its running at 1064.1mhz, I know the Double rata rate so should be at basically 1500mhz and it isnt.
I recently updated my Bios through the motherboard to latest one which is 5220 and it worked fine, updated fine, pc feeling fine... until I change these values of the ram in bios via the DOCP as this is basically XMP I imagine for Asus boards. it automatically set the correct settings of 15-17-17-35 and it seemed fine again, rebooted, in windows 10, all perfect. Until I shutdown and started up again the next day. System hanged, Red light on mobo which is CPU but frankly I knew it was the settings of the ram so restarted a few times and it came back on, displayed I had bad settings apparently so changed a few things again with ram, slightly lower and still same thing. Cut a long story short, its always the same, hangs each time on second reboot unless I set it all back to default which means I lose the speed its supposed to be at which is frustrating, saying that I didn't even know before but now I do it seems like I am only getting half arsed ram.
My question is for all the genius's here, I am not one of them sadly, could anyone shed some light as to why this keeps happening? Is it a compatibility issue with Ryzen? Would really appreciate some knowledge bombs on this one as I am stumped.
Will provide pictures or anything that is needed.
Thanks guys. -
03-11-2020, 12:37 PMArne Saknussemm
Is the system shutting down or is it waking from sleep?...i.e. is fast startup enabled in windows?
Check what BIOS/DOCP is setting for soc voltage...maybe set that to 1.1v or 1.2v -
03-11-2020, 05:57 PMbliv25Man, I am even getting it now when I shut down on default optimised settings, im guessing its the new bios update, maybe drop it down a few levels? Thoughts?Quote:
Originally Posted by Arne Saknussemm
Literally from shutting down, powering back up doesnt work, have to turn it off again and back on until it comes alive. Never happened before, must be because of the new bios surely? -
03-11-2020, 06:25 PMArne Saknussemm
Maybe download a fresh BIOS file and reflash the bios...
But clear CMOS before and after the flash
If the problem persists use a single stick of memory in the recommended slot and swap sticks...just to make sure the DIMMs are working OK.
Or try setting SOC voltage and see if ti clears up....make sure dram voltage is 1.35 too
Some Hynix memory on first gen Ryzen CPUs was/is an absolute recipe for headaches of this type -
03-11-2020, 07:11 PMbliv25Ok cool i'll have a look, just all so weird its happening after the bios upgrade! Grrrr lol thanks for the help i'll report back soon.Quote:
Originally Posted by Arne Saknussemm
-
03-12-2020, 06:53 PMbliv25Ok, so checked the DOCP settings, voltage set to 1.35, still same thing, boots sometimes and hangs others, im confident its this bios update but I cant remember fore the life of me which it was before, I know it was some 2017 one but cannot remember, this is so frustrating. Also you said clear the bios first before flashing, how does one do this? Only option is to flash it not clear in the bios? Unless there is a windows one? I am not sure here, if you need pictures mate do let me know i'll do my best, this is beyond frustrating.Quote:
Originally Posted by Arne Saknussemm
Also to note, when actually in windows, nothing wrong at all, perfect etc running smooth all apart from ram reading in system properties as 15.9gb with this bios setting when is actually 16gb and I have not touched CPU, Windows properties report it as default 3200mhz but in CPU-Z it reports as 3391.9mhz Its all very confusing! :< -
03-12-2020, 09:24 PMArne Saknussemm
OK I understand your BIOS concerns but if I understand rightly from your first post your RAM was never running at rated speeds just at defaults?
What is BIOS setting for SOC voltage?..that is an important voltage...
You could try running 1.4 for dram voltage...perfectly safe...
Clear cmos maybe a button or a jumper on the board...you'd have to dig out the manual
Maybe post up the memory and spd tabs of CPUz
Edit:
Attachment 84255 -
03-13-2020, 12:23 PMbliv25You are correct mate, the ram was never running at proper speed from the beginning although at least it booted first time every time, then I did this bios update and its gone to pot! I will do as you suggested and will take pictures and post all here to see if you can spot anything out of the ordinary.Quote:
Originally Posted by Arne Saknussemm
Many thanks for your help with this.
I will tell you that this build was built by Asus ROG as I was the first winner of the youtube show rog your rig uk. Its been fantastic and I am forever grateful for what they gave me but realistically it has never been right since I got it home, small issues here and there but hopefully you can help me solve this mystery! :D -
03-13-2020, 03:26 PMdavemon50Quote:
Originally Posted by bliv25
I have nothing that will help you with your RAM issue, but just wanted to say congratulations on your win, that's awesome. :) -
03-13-2020, 07:26 PMbliv25Hi mate,Quote:
Originally Posted by davemon50
Thanks so much, I am still in awe with it as I have never won anything previously, and that was 2 years ago now! From the show I looked so moody to be honest lol I was definitely not, just totally overwhelmed with the whole experience. Appreciate the message mate still