Modded bios Rampage VI

Printable View

Show 40 post(s) from this thread on one page

03-05-2020, 03:45 PM
thewebsiteisdown

2 Attachment(s)

I used the link listed in the pic and did the procedure listed in the pic. I used flashback with utilizing the right usb port with the pc off,. and it went through it's procedure of flashing the bios and I'm still showing 60h You can see it programming the bios with the flashing bios light and the flashing bios flashback light. There must be something I'm missing or it is not sticking on my board.
03-06-2020, 02:40 AM
restsugavan

Quote:

Originally Posted by thewebsiteisdown

I used the link listed in the pic and did the procedure listed in the pic. I used flashback with utilizing the right usb port with the pc off,. and it went through it's procedure of flashing the bios and I'm still showing 60h You can see it programming the bios with the flashing bios light and the flashing bios flashback light. There must be something I'm missing or it is not sticking on my board.

You must contacted Master tistou77 for the new copy of file first.:o
03-06-2020, 03:12 AM
thewebsiteisdown

Quote:

Originally Posted by restsugavan

You must contacted Master tistou77 for the new copy of file first.:o

@tistou77 May I haves please sir? I know I did the procedure correctly because I've done it before3 to fix minor corruption issues from tweaking memory before. You're either doing it right or wrong.
03-06-2020, 05:18 AM
Desertum_0

Well, this is odd,

After flashing the lastest 3006 -Microcode 69 it shows on AIDA64 Extreme:

7900X CPU:

Microcode Update Revision 68h
Stepping : U0 ???

Also, I am using Intel ME 11.12.0.1622 + Intel Mei 1931.14.0.1323.
Is this the right configuration?

Looking forward to hear your opinions.
Thanks
03-06-2020, 07:37 AM
thewebsiteisdown

2 Attachment(s)

Quote:

Originally Posted by Desertum_0

Well, this is odd,

After flashing the lastest 3006 -Microcode 69 it shows on AIDA64 Extreme:

7900X CPU:

Microcode Update Revision 68h
Stepping : U0 ???

Also, I am using Intel ME 11.12.0.1622 + Intel Mei 1931.14.0.1323.
Is this the right configuration?

Looking forward to hear your opinions.
Thanks

I figured it out for us. So apparently if you're on the BIOS revision 3006 for example already, it will remain unchanged. If you're on the previous BIOS 2002 for example and flash up to 3006 modded for 69h microcode, it sticks just fine.
03-06-2020, 01:28 PM
tistou77

Quote:

Originally Posted by thewebsiteisdown

@tistou77 May I haves please sir? I know I did the procedure correctly because I've done it before3 to fix minor corruption issues from tweaking memory before. You're either doing it right or wrong.

I checked and no worries on this bios
Try to download it and install it again
03-07-2020, 02:48 AM
thewebsiteisdown

Quote:

Originally Posted by tistou77

I checked and no worries on this bios
Try to download it and install it again

I got it thank you though. It was because I was on bios 3006 already and so even flashback didn't update the bios so it didn't give me the updated 69h. I went back to the 2002 BIOS and then stepped back up to your 3006 modded BIOS using the flashback option and that fixed the issue.

Thank you for your hard work on this seriously.
03-07-2020, 04:50 AM
tistou77

You're welcome ;)
03-07-2020, 09:21 PM
lingaraju06

rampage vi oemga

flashed 3006 with microcode 69 and in aida64 it shows microcode revision as 2f00h for my i9 10920x instead of 69, is that something i need to look further into?, thank you.
03-07-2020, 09:46 PM
tistou77

Quote:

Originally Posted by lingaraju06

flashed 3006 with microcode 69 and in aida64 it shows microcode revision as 2f00h for my i9 10920x instead of 69, is that something i need to look further into?, thank you.

Microcode 69 is for Skylake-X, as indicated on the link ;)

Show 40 post(s) from this thread on one page