-
09-20-2020, 09:37 AMdfaovredYou have an ASUS ROG SS3 motherboard, so :Quote:
Originally Posted by lewatoto
You need Realtek Audio Drivers (UAD - ASUS ROG SS3 MB) from the first post of this thread.
Follow scrupulously your CLEANUP process for the previous driver install then install the UAD - ASUS ROG SS3 MB driver. -
09-20-2020, 09:46 AMFlufflePuff1337Quote:
Originally Posted by dfaovred
I tryit but for some reason realtek audio console will not install error on downloading -
09-20-2020, 01:27 PMSwordmaster512Is this normal or not? Anybody with a z490 ROG board and latest drivers experiencing automatic Amplify level switching to match impedance sensor's readings regardless of what it is manually selected in Realtek Audio Console after plugging/unplugging headphones?Quote:
Originally Posted by Swordmaster512
-
09-20-2020, 04:38 PMSwordmaster512Hi MokiChU, thanks for the answer.Quote:
Originally Posted by MoKiChU
If I understood correctly what you suggested (but I'm not sure about that) it can certainly be considered a workaround, at least in part. The point is (but maybe I could be wrong) that you can bypass, in a sense, the sensor check on headphones impedance by occupying the jack port with the extension cable prior to connecting them to it, and by doing vice versa when unplugging them (first you unplug the headphones from the extension, and only then you unplug the extension cable itself from the jack port), so that no variation in impedance reading can change the Amplify level you set. But this works (at least for me) only if you hadn't enable before "Make front and rear output devices playback two different audio streams simultaneously", otherwise as soon as the jack port is occupied (even by the extension cable alone) and "Realtek HD Audio 2nd output" appears in the Console the Amplify level is set back to "Extreme" for both devices. Not to mention the fact that in this way you retain the "Performance" Amplify level for the speakers at the cost of having to manually change the parameter if you want a different Amplify level for your headphones (in my case "Extreme").
Another (pseudo-)solution I found is to activate, in Advanced Settings, "Disable front panel popup dialog", deactivate "Enable Jack detection when device is plugged in", and check "Make front and rear output devices playback two different audio streams simultaneously". By doing this every device remains always active (even 2nd output and microphone), so that whatever Amplify level you set stays like that for each device, no matter what you plug/unplug, since jack detection is disabled. But you have to manually switch between playback devices when you want to listen to headphones or speakers respectively, because after plugging/unplugging jack the switch won't be automatic anymore.
Am i missing something? I hope I didn't write anything too silly, and sorry for being a nuisance, but I just want to understand if I did something wrong. If I didn't, what I'm asking is: wouldn't it be possible to make user values simply override sensor readings no matter what? -
09-21-2020, 04:17 PMHGnDCI assume this means that your advice, "You need Realtek Audio Drivers (XXX) from the first post of this thread" should now be understood to refer to the drivers you just posted, correct?Quote:
Originally Posted by MoKiChU
Thanks.
-Howard -
09-21-2020, 06:56 PMMrAgapiGC
on my way to test. so far was being perfect.
-
09-21-2020, 09:52 PMHGnDCOne more thing, Apps & Features shows I also have "Realtek Card Reader" Installed. I assume that'd OK to leave alone--no need to uninstall?Quote:
Originally Posted by MoKiChU
-
09-21-2020, 10:39 PMiicycubeHi MoKiChU, if I got the previous 9013 UAD driver installed, do I need to do a cleanup and install or straight go for update the newest 9018 driver?Quote:
Originally Posted by MoKiChU
-
09-22-2020, 08:26 AMMelchior
Hi MoKiChU, thx for the Realtek audio driver updates..
yes I can finally post... Huwayy! -
09-22-2020, 01:39 PMMrAgapiGC
just a advance.
After 2 solid drivers, the SS3 hahimic start to crash again. going back to 6.0.9013.1 since was the best so far
![ASUS Republic of Gamers [ROG] | The Choice of Champions – Overclocking, PC Gaming, PC Modding, Support, Guides, Advice - Powered by vBulletin](images/asus/rog_logo.png){kind=logo}