[DRIVERS] Realtek Audio (Intel 2xx/3xx/4xx/5xx/6xx/7xx & AMD 3xx/4xx/5xx/6xx)

Hi, what driver can I install for the ROG Crosshair VIII Extreme (to not install the Sonic stuff)?

Thank you so very much.

Quote:

---

Originally Posted by xenon2

Same problem, crackling is present whatever I do. (Latest mobo bios, latest drivers, windoze 10)

Workaround is to run this stupid realtek audio panel go to "device advanced settings", change output from headphone to front speaker output and then back, crackling is gone until next restart.

---

Quoting this from my audio issues thread on this forum. This actually works on my B550-F, currently using the latest MoKiChU driver, MSI mode and hibernation disabled.

UAD 6.0.9231.1 drivers on a X470-PRO with Quadraphonic speakers (4.0) doesn't output 4.0 audio with Diablo II Resurrected. Only does 2.0/Stereo.

Uninstalling the Realtek drivers and going back to the default Microsoft ones works fine (for 4.0, I have to select 5.1 audio settings, disable extra speakers, and make sure Channel Phantoming is enabled).

Hi Mokichu,

Firstly I would like to convey my thanks for all of your efforts in maintaining this invaluable community Realtek Audio resource.

I have used the drivers posted here for some time now and the install advice has always been more than adequate. In June I experienced an unrelated failure of my Asus Prime X299 Edition 30 (upon which these drivers were previously installed without issue) necessitating RMA to Asus. To cut a long story short (and over 8 weeks!) the failure was ultimately confirmed and the retailer informed me that Asus could not replace the Motherboard instead providing a full refund. Owing to the unique nature of this board and components already purchased to take full advantage I was left to source a new Edition 30 in replacement.

Eventually, I was able to source one overseas and though considerably more expensive I finally have my replacement! Windows 10 Pro X64 21H1 was clean installed in the last few days and the Drivers updated to their latest releases including the Realtek Audio Drivers listed here. As my Motherboard uses the Realtek® S1220A 8-Channel High Definition Audio CODEC which features DTS X Ultra I selected your V6.0.9231.1 UAD Driver (31/08/2021) for ASUS TUF/PRIME DTSX Ultra Motherboards.

As usual, I believe I have followed your step by step guides:

CLEANUP:

1) Uninstall Drivers, and Apps (Start > Settings > Apps) - [NB. No Apps were Present] then restart your PC
2) Launch Driver Store Explorer > Checking the boxes of all versions of drivers which .inf starts with a-volute | avolute | dts | hdx [NB. Non Present] only realtek
3) Check the box "Force Deletion" then click on the "Delete Driver" button then restart your PC

Upon restart followed by:

INSTALL:

1) Launch "Install.cmd" by right-click Run as admin > [NB. Automatically restarted]
2) Automatic installation of Realtek Audio Control/Console after rebooting, [NB. Installs but reports "Cannot connect to RPC service"]
3) Automatic installation of DTS:X Ultra [NB. Does not install & unable to install manually reports error 0x803FB005 when attempting manual download]

The Audio Drivers - Device Manager (Each of: Line In, Microphone, Realtek Digital Output & Speakers report V10.0.19041.1 {Microsoft - 06.12.19})

All attempts to uninstall Device fail upon reboot and Windows does not offer the "Delete the driver software for this device" checkbox. It does not show up in Driver Store Explorer (the only reported instances of 10.0.19041.1 being Printer Drivers prnms001.inf & prnms009.inf) with only realtekasio.inf (1.0.0.8 - 24.03.21) & hdxasus.inf (6.0.9231.1 - 31.08.21) listed.

Clearly I am missing something this time, what am I doing wrong :confused: ??

Thanks in anticipation of your step by step advice :)

UPDATE: 30.09.21

All now resolved....

To assist others, I discovered that I had overlooked the Driver (Realtek High Definition Audio Driver) offered in the Armoury Crate Tools > Drivers menu :rolleyes: which installs 'Realtek High Definition Audio Driver' which then becomes visible in Control Panel > Programs & Features and also in Device Manager > Sound, Video & Game Controllers as 'Realtek(R) Audio' after which the magic starts!!

I was then able to follow Mokichu's instructions and all installs flawlessly including the Realtek Audio Console App and DTX Ultra App and now all is perfect and the Audio Console confirms that the 6.0.9231.1 is installed. Finally I was at last able to configure my Logitech Z907 audio settings once more so normal service is resumed :)

Hope this helps someone in due course, otherwise apologies to all for the false alarm and thank you to all those who looked!

PC Pilot

Z490 ROG MAXIMUS XII HERO (WI-FI) getting error Code: 0x803FB005 when trying to download Realtek Audio Control. Followed instructions for SS3, this is correct driver?

EDIT FIX: Searched and found I had downloaded the incorrect driver. SS3 DTS is what worked.

Hello , i have a TUF GAMING B550-PLUS and im having issues with my microphone connected to the jack of the MB , the output has a lot of noise and really low voice even while trying with different microphones so i can say the issue is the motherboard.

Which drivers should i download ? Any tip to try to remove annoying that static noise?

peopel and just friends!! how about drivers for windows 11?can we expect soon as possible?

Quote:

---

Originally Posted by AnonGhost

peopel and just friends!! how about drivers for windows 11?can we expect soon as possible?

---

using a Prime Z590-A /11700k /WiFi 6e /BT5.2
I have both the release build and the Dev build of Windows 11 installed on different M'2's on this system.
All drivers posted by MoKiChU have worked just fine for me for all devices under Windows 10, 11, and 11 Dev

Quote:

---

Originally Posted by MoKiChU

Hi,

You have an ASUS TUF DTS Custom motherboard, so :

You need Realtek Audio Drivers (UAD - ASUS TUF/PRIME DTS Custom MB) from the first post of this thread.

Follow scrupulously your CLEANUP process then your INSTALL process, for the next drivers packages that I would release, you will can directly follow your UPDATE process.


Once it's done, follow these 2 TIPS (also visible at the bottom of the first post) :

1) Disable hibernation :

- Right-click Windows Start button then click Search.
- Search for cmd. In the search results list, right-click Command Prompt and then click Run as administrator.
- If/When you are prompted by User Account Control, click Continue.
- At the command prompt, type powercfg.exe /hibernate off and then press Enter then close the Command Prompt.

2) Enable MSI (Message Signaled-based Interrupts) mode on all your supported devices (see the column "supported modes") with MSI Mode Utility (Right click on "MSI_util_v3.exe" > Run as administrator), then Apply, then close MSI Mode Utility & restart your PC.

---

The sound of the mic now is louder and with less noise , not completely fixed as expected from a 150 euros motherboard in 2021 but better than before ...

Thanks a lot ! Great job !