[DRIVERS] Intel Ethernet/WiFi/Bluetooth
Printable View
-
07-20-2020, 01:53 PMcriskoe
You can check what controller you got by looking at the HW ids.... At the end will have a V2 if you got a V2.. BUT.......
While your initial issue with complete disconnects has disappeared by rolling back driver. I still really believe the NIC isnt acting as good as it should... Myself and a few others that ive found on various forums have experienced throttling on high speed internet and the intel I225-V. I spend a few weeks trying to figure it out, including a completely new motherboard... With that being said ive also seen some people say its working fine for them. So I dunno.... I dunno but but i feel something isnt right.....
Also I hate to be the bearer of bad news but who ever on reddit is saying the V2 is fully bug fixed is wrong... People have found the V2 still suffers from issues......... Issues that according to some are still on a hardware level. :( But that it just MIGHT be possible Intel can try to mitigate the issue in the future with new firmware releases. The problem has to do with compatibility with certain switches from what I understand........
There is already a V3 expected later this year.... LOL... Its kinda bad.... https://wccftech.com/intel-foxville-...ards-affected/
Im not that impressed to be honest with you.... Im lucky enough that my Z490 board also has a Aquantia 10gb lan aswell. So Ive been just using that... This intel one is buggy....... -
07-28-2020, 06:48 PMCezarycezary777
Hi MoKIchU.
There is a driver driver showing in DriverMax app for Intel Bluetooth 21.110.0.3 from 25/06/2020. Is ok to update this driver? Please advise. -
08-14-2020, 09:45 PMEXILE157
I've tried in the beginning going through the ridiculous steps :
Intel(R) Gigabit Ethernet Driver V1.0.1.4 for Windows 10 64-bit.
Before installing Intel I225-V driver v.1.0.1.4, please ensure that Intel I225-V firmware should be updated to v.1.45 via firmware update tool. After finishing necessary firmware update, please shut down and unplug the power cord then reboot the system normally. For more information, please refer to the firmware update guide.
This did not work at all, I was going through some BS with this board until it came to me this Mobo has (Wi-Fi) and that did help me get all the Windows 10 updates and I was able to install the (Armoury Crate) - I'm now running on v.1.0.0.13 and so far so good. I'm afraid trying to go and run the latest (v.10.1.4) -
08-16-2020, 09:18 PMEXILE157
Please one at a time with the help....:rolleyes:
-
08-17-2020, 06:19 AMbtrach144
What exactly doesn't work? The Intel lan is borked and right now, it's largely believed to be a hardware issue. Intel is sending out newer boards with a revised NIC but for those of us with earlier boards, we're stuck.
Use Wi-Fi or the Marvel 10G NIC. -
09-16-2020, 09:15 PMJesseinsfBluetooth Drivers
If you are on the Windows Insiders Beta channel, you can install Intel Bluetooth version: 21.120.0.4 from Windows Update.
-
10-05-2020, 08:44 PMJesseinsf
-
10-27-2020, 07:30 PMpinkfloyd1173
-
10-27-2020, 08:15 PMpinkfloyd1173
Thank you good sir.
-
10-29-2020, 07:03 PMGhauntretDoes This Works For Laptop Too?
Hi, does this works for ROG laptop too? I've ROG GL503GE on BIOS version 316 with both Intel WLAN & BT drivers at version 21.30, but the Wi-Fi speed is very slow compared to it used to be, and even the signal icon is not at the full strength (missing 1 bar).