Marvell Aquantia 10G AQC107 Firmware Update 4.2.29

Quote:

---

Originally Posted by vmanuelgm

Ok, problem solved, I will edit the first post.

Thanks for your help!!!

---

Your welcome

hello sorry to bother you.

I have a formula XII with this network card and it happened to me that from time to time I was disconnected from the network for no apparent reason, I was checking online and I saw your post on asus ROG indicating that there was a firmware and software update.

I have put the last driver that you have put 2.2.1.0 and the last firmware that you have uploaded for that controller Firmware for Aquantia 10G AQC107, version 4.2.29

And now the computer every 4 hours of being off turns on itself .....

Quote:

---

Originally Posted by toretobcnn

hello sorry to bother you.

I have a formula XII with this network card and it happened to me that from time to time I was disconnected from the network for no apparent reason, I was checking online and I saw your post on asus ROG indicating that there was a firmware and software update.

I have put the last driver that you have put 2.2.1.0 and the last firmware that you have uploaded for that controller Firmware for Aquantia 10G AQC107, version 4.2.29

And now the computer every 4 hours of being off turns on itself .....

---

Go to device manager in the network section for aquantia or Marvell and look for Â*the advanced tab. Scroll down to wake from power off state. Change to disabled. Also uncheck the box in the power management tab regarding allowing the device to wake the computer. Should fix the problem.

I'm sorry to bring bad news, the issue of sporadic ignitions was fixed by deactivating the magic pack! that is ok now the computer does not turn on.

but it continues to have power outages with the marvell aqc107 I have the latest firmware and 2.2.1.0 I don't know what to do anymore ...

I cut the internet when I want ... what a ****ty card

Quote:

---

Originally Posted by vmanuelgm

Here it is:

https://youtu.be/vU_RgdLc-hE

---

this worked on R6EE
Thanks

Hi Mate.

My aqc107 on the XII formula can not connect to internet after updating to 4.2.29. Everything works fine on 3.1.100, is there any solution to flash back?

I accidently deleted the backup.

I'm sorry to tell you that I am in the same case ... I did what I said above and in the end I have formula XII using marvel 10gb with the 2.1.21.0 driver and the firmware version 4.2.29.

Now I have no way of updating or restoring the firmware to any other version because whatever I do it always shows 0.0.0.0 .... I already give up installing any other version, I consider it lost.

I keep having packet losses, and random network disconnections for no apparent reason, I lose the DCPH when I want and I have to be giving it to (solve problem) in windows to reconnect ... it is infinitely annoying because when it catches you playing you You stay in the middle of the game or you fall directly.

It is the worst RED card I have ever seen on a motherboard! I am willing to get rid of it and the worst there is no solution ...

we continue without any help ... it's absurd I can't change motherboard because of the whole cooling issue and I can't use the network properly ... I hate this ****ty thing

Release Notes
=============
4.2.40 Apr 13 2021
WatchDog Timer profile support

4.2.39 Mar 08 2021
ATLFW-666 Fixed issue to retain subscription after system reboot and after last alert indication
Note - AqDashAgent v0.31.0 service needs a restart after firmware upgrade.

4.2.38 Mar 02 2021
ATLFW-627 Add DSP1054 Indications Profile
ATLFW-644 Add environmental error events in Record Log and Indications profile

4.2.37 Feb 17 2021
Software Inventory Profile - Added NIC Driver version
Software Inventory Profile - Added EC firmware version
Fixed ssh and telnet CTS test failure
ATLFW-645 Fixed wrong netstat -e traffic counters
ATLFW-629 Configure and display IP address for KVM

4.2.36 Feb 04 2021
ATLFW-644 Fixed issue to report error events in record-log profile
ATLFW-621 Added 'Physical Computer System View Profile'

4.2.35 Dec 22 2020
ATLFW-620 Exclusive mode with shared MAC
ATLFW-624 Software Inventory Profile (Firmware part)
Remove DHCP from AqDashConfig help
Improvements to RecordLog profile (up to 128 records, number of records displayed correctly)

4.2.34 Oct 20 2020
Put pack IP_Configuration

4.2.33 Sep 29 2020
Put back PCI_Device, RecordLog and OS_Status profiles

4.2.32 Sep 16 2020
Fix extra byte at the end of TLS encrypted data

4.2.31 Sep 16 2020
Fix memory corruption issue

4.2.30 Sep 02 2020
Add early cable detect status bit to 0x374
Fix DNS client profile CTS failures

4.2.29 Aug 06 2020
Put back physical asset, cpu, memory & sensors

4.2.28 Aug 05 2020
Remove unnecessary profiles

4.2 .27 Jul 28 2020
ATLFW-602: DirtyWake for 4.x

4.2.26 Jul 24 2020
ATLFW-609: Cannot enter BIOS using TCR SSH when Setup Prompt Timeout = 1

4.2.25 Jul 15 2020
Fix TCR session being dropped if Windows reboots

4.2.24 Jul 03 2020
Fix crash when incomplete smbus command is received
Add NEPC register to core dump

4.2.23 Jun 30 2020
Fix DRV_MSG_DASH_GET_DASH_SETTINGS command

4.2.22 Jun 25 2020
ATLFW-598 No traffic after computer restart

4.2.21 Jun 22 2020
ATLFW-596 DASH does not work if configure it with different key and certificate for second time
Add IP configuration profile



Download: http://37.187.91.32/index.php/en/out...55/lang,en-gb/