AI Suite 3 Version 3.00.10 & 3.00.13 - user test/report thread

Good morning, my fix was to undo the windows 10 update and the ai suite3 came back

Quote:

---

Originally Posted by Targonis

It seems to be working fine, though the main fan control selection from the popup controls crashed when trying to change fan profiles.

---

Me too on x299A, installed the beta suite as an update. I ran fan expert as I could see the software showed my previous fan positions correctly.
I can change the fan mode in the main gui, but not on the minibar which crashes and disappears.
This is my first experience with this software and any overclocking. AIsuite is not for a novice as they claim.
Installing the beta did remove the 30% oc (overkill for me with temps and wanting to use the machine for rendering
software more than anything else)
I was so uncertain of what it was doing in running the 5-way optimize and how to back it down from the high it was on. what would happen if I re-ran
it, etc. It needs more documentation. Like I say I have never overclocked before, but have been building my own computers since the super-socket 7
days.

Quote:

---

Originally Posted by glenda1

Me too on x299A, installed the beta suite as an update. I ran fan expert as I could see the software showed my previous fan positions correctly.
I can change the fan mode in the main gui, but not on the minibar which crashes and disappears.
This is my first experience with this software and any overclocking. AIsuite is not for a novice as they claim.
Installing the beta did remove the 30% oc (overkill for me with temps and wanting to use the machine for rendering
software more than anything else)
I was so uncertain of what it was doing in running the 5-way optimize and how to back it down from the high it was on. what would happen if I re-ran
it, etc. It needs more documentation. Like I say I have never overclocked before, but have been building my own computers since the super-socket 7
days.

---

The minibar widget also crashes on my pc as well when trying to change fan profiles. I can change them from the main gui, and they change quickly as well. The AsPowerBar.exe just stops working when I select a profile, but I can relaunch it.
-EDIT: I am on Maximus VIII Ranger Z170.

The beta is great and all, but it lacks a lot of the functionality that it had prior to the Windows update. For example, the latest, albeit beta, version of AI Suite 3 does not have understanding of water cooling in its fan expert like it used to have. In general, the smart fan part of fan expert does not do that great of a job of managing the fans, as I have seen GPU and CPU temps rising pretty high in some cases and then I check and the fans are off and I need to manually override the smart fan option and then my temps significantly drop. Also, away mode will not allow for sleep mode to be turned off. I either have to turn away mode on and let my computer go to sleep after 2 hours or I have to turn it off and use windows to handle away states. These are just a few bugs I have found. Does anyone know when ASUS plans to update the beta version of AI Suite 3?

So , I made a fresh Windows 10 installation and now this **** SOFTWARE do doesn't even install , nada.. all I got is a little spinning over the mouse and NOTHING so fresh Windows installation , removed that utter **** KB that supposedly block the installer but NO GO!
Im getting really SICK AND pissed with ASUS first incompetent as they are the **** up DTS support on almost all ASUS mobos , now THIS! so what fcking use is my Z170-A now.
Then ,lazy as they are they fck up my XONAR DSX as the driver is form 2015 NEVER FCKING UPDATED.
This is last time I ever buy from this utter **** company !

Quote:

---

Originally Posted by Targonis

It seems to be working fine, though the main fan control selection from the popup controls crashed when trying to change fan profiles.

---

Having same issue with selecting profiles from the AS Power Bar application throws an "index < count() error on line 1700 of sensor.cpp" or something similar. Also having a problem with PE Updater throwing a "cannot access AsIO.sys!! (2)" error.

Anyone have any solution for either of those?

System: ASUS Prime Z370-A, 8700k, GTX1080 in custom water loop with 0606 Bios update installed and Windows Update installed.

Quote:

---

Originally Posted by dvojinov

So , I made a fresh Windows 10 installation and now this **** SOFTWARE do doesn't even install , nada.. all I got is a little spinning over the mouse and NOTHING so fresh Windows installation , removed that utter **** KB that supposedly block the installer but NO GO!
Im getting really SICK AND pissed with ASUS first incompetent as they are the **** up DTS support on almost all ASUS mobos , now THIS! so what fcking use is my Z170-A now.
Then ,lazy as they are they fck up my XONAR DSX as the driver is form 2015 NEVER FCKING UPDATED.
This is last time I ever buy from this utter **** company !

---

The solution to this is to click the "unblock" checkbox on the zip file.

So.. is this enough feedback to get a final version yet?

Also having the same issue, running cleaner and reinstalling does not fix it. When will this software be fixed for the latest windows update Asus?!?!?!?!?!?!?

Quote:

---

Originally Posted by basechung2

i am on x99 sabertooth too
but my installer just shows four items
ASUS AI Suite 3 v3.00.10
ASUS EZ Update v2.03.17
ASUS System Information v1.01.19
ASUS USB BIOS Flashback v1.03.08

need to copy the folder "Thermal_Radar" from previous version installer?

---

Yes, together with the other missing stuff:
ASUS Ai Charger+
ASUS Push Notice
ASUS Thermal Radar 2
ASUS USB 3.1 Boost
ASUS USB Charger+

and remove the DIP5 (not to get into conflict with Thermal Radar 2)