AI Suite 3 Version 3.00.10 & 3.00.13 - user test/report thread

Quote:

---

Originally Posted by Raja@ASUS

Okay. Let me check if they're still going to support controlling the card's fans via ai suite. There are a limited number of models that are supported for fan xpert - usually strix and above.

---

Just a heads up. Have reported this back to the software guys (with more info, this time). Will let you know what I get back. It's CNY from tomorrow, so it may be a while before I hear anything back.

Quote:

---

Originally Posted by Raja@ASUS

Okay. Let me check if they're still going to support controlling the card's fans via ai suite. There are a limited number of models that are supported for fan xpert - usually strix and above.

---

I have a Expedition card and it works.

I had to completely remove AI Suite because I was immediately getting black screen freezes and computer lock ups. I have the Asus Prime X-370 Pro. Tech support said that they were sorry and they would pass it up the ranks. Hopefully the software can be fix because all I have managing my fans & cooler is Corsair.

Quote:

---

Originally Posted by Raja@ASUS

Just a heads up. Have reported this back to the software guys (with more info, this time). Will let you know what I get back. It's CNY from tomorrow, so it may be a while before I hear anything back.

---

would it be possible to have a update to be able to change what sensor is used for CPU - Aux fan curve control ? ( like select CPU package, or a core, or CPU (PECI ) which according to HWinfo64 provide way more accurate temps ) which would be a live saving

Because currently, with my maximus hero VII it work pretty bad compare to pre-win10 meltdown thing update. my CPU core now easyly reach 7-8 more °c because of this CPU temp tracking that doesnt work well anymore. ( and yes i'am using the same fan curve as before )
Attachment 71586


And just to be clear, i even ended up to totaly reinstall win10, and only install the lastest Aisuite3 version aviable on my MB asus support page, just in case..
Something broke :(

Quote:

---

Originally Posted by wootwoots

would it be possible to have a update to be able to change what sensor is used for CPU - Aux fan curve control ? ( like select CPU package, or a core, or CPU (PECI ) which according to HWinfo64 provide way more accurate temps ) which would be a live saving

Because currently, with my maximus hero VII it work pretty bad compare to pre-win10 meltdown thing update. my CPU core now easyly reach 7-8 more °c because of this CPU temp tracking that doesnt work well anymore. ( and yes i'am using the same fan curve as before )
Attachment 71586


And just to be clear, i even ended up to totaly reinstall win10, and only install the lastest Aisuite3 version aviable on my MB asus support page, just in case..
Something broke :(

---

+1 this.

I do a lot of 3d rendering and the difference of temp between core max/cpu package and the temp used by ai suite is 10 to 20 celsius while rendering.
That is a lot.

Quote:

---

Originally Posted by DSD27

Guys if you have a previous/older generation board just go to the download page of any Maximus VIII or X board. They have the most recently updated version of AI Suite after that windows update problem.

---

You're the real MVP.

Quote:

---

Originally Posted by Raja@ASUS

Just a heads up. Have reported this back to the software guys (with more info, this time). Will let you know what I get back. It's CNY from tomorrow, so it may be a while before I hear anything back.

---

As I understand it, and I have the same problem: It's not about controlling the graphic card fans, but rather about selecting GPU temps to control chassis and radiator fans, as it was possible before the update debacle.

So guys i have a question before all !
I have a sabertooth 990FX R3.0 the new one and ofc i have problem aswell whit AI suite and Thermal Radar II, i tried to use FanExpert but its working even worste and give me error like access violation etc. So after they fix it, do you think i can use aswell ? Or i need to stick to thermal radar cause i have a TUF motherborard instead of a ROG one ?
And in the case i have to use thermal radar its possible to have gpu sensor and select the real cpu sensor ?
Ty in advance

Quote:

---

Originally Posted by metalgrin

As I understand it, and I have the same problem: It's not about controlling the graphic card fans, but rather about selecting GPU temps to control chassis and radiator fans, as it was possible before the update debacle.

---

Exactly. I need GPU temp sensor for radiator fan control. I am under water on gpu thus "no gpu fans" to control! lol

I have been watching this thread since just after the Microsoft patch problems. I see some people have trouble with AI Suite III 3.00.10 and some 3.00.13. Some people uninstalled the old AI Suite software and then used the AI cleaner and some just installed over the old or installed 3.00.10 then 3.00.13. There seems to be a 3.00.14 or a second version of 3.00.13?

I figured that with all the problems, Microsoft would have patched issues again so I didn’t do anything about AI Suite. With the Meltdown patches, AI Suite just did not run on two of my machines. Within the last couple days Microsoft issued patches and my old AI Suite started to run again.

Now with the old version running, it seems either the readings are not correct or there are no readings when I open AI Suite 4 way Optimization. My problem now is do I uninstall my old AI Suite and install 3.00.13 (whatever version) or do I wait for ASUS to issue an AI Suite 3.00.15 or 16 as the new Microsoft patches should have altered how 3.00.13 runs on all machines.

One of my boxes is an ASUS Z87 Pro, i7-4770k with AI Suite III 1.00.56 on Windows 8.1 64 bit. (I know it is an older system, but same problem with other newer box.)