Search:

Type: Posts; User: Loadlineac

Search: Search took 0.00 seconds.

  1. Replies
    26
    Views
    4,364

    the same with my XI Extreme, look what the Q-Code...

    the same with my XI Extreme, look what the Q-Code LED shows. With me cold start problems and 55 - Memory not installed.
  2. Hasn't finished ... still hangs. I took out...

    Hasn't finished ... still hangs.

    I took out the CMOS battery, then 6A - System Agent DXE SMM initialization is started was gone. For this I now get 55 - Memory not Installed, as I said in 1704...
  3. Has done, it was due to too tight RTL - IOL...

    Has done, it was due to too tight RTL - IOL latency.
  4. Maximus XI Extreme 1802 Boot problems [System hangs]

    Hi there,

    I've had problems with the board since 1802 that weren't there in 1704. The following: It comes after the PC was without power, I get "6A Detect Memory" and then the PC hangs. If the PC...
  5. Replies
    2
    Views
    484

    CPU VCCIO voltage stabilizable

    Hello,

    Is there an option on the Maximus XI Extreme 1502 to stabilize the CPU VCCIO voltage?

    It fluctuates somewhat: 1,184 V - 1,216 V according to HWiNFO and BIOS.
  6. Replies
    4
    Views
    3,695

    No, The Uncore clock is influenced after my...

    No,

    The Uncore clock is influenced after my test only by the Vcore.
  7. Replies
    27
    Views
    8,419

    Hello, Here with 1302 and Maximus XI Extreme...

    Hello,


    Here with 1302 and Maximus XI Extreme no problems. All the latest updates for Win10 are installed. Everything runs like oiled.



    This event message is also here on the PC, but this...
  8. Thanks, I need 1.3800V to be stable at 3600...

    Thanks,

    I need 1.3800V to be stable at 3600 MHz.

    Again to Mem OK! Problems ...
    In order to get rid of the message "Memory OK! Succeeds in system booting", I set the "CPU VCCSA" voltage to...
  9. From myself and I-Net. Still being tested ...

    From myself and I-Net.


    Still being tested ...
  10. Ram solved problems

    Could solve the RAM problems. (Mem OK!)

    1. BIOS flashed to 1302
    2. "Round Trip Latency" = Enabled
    3. "Rank Margin Tool" = Enabled
    4. "Trace Centering" = Enabled
    5. "Dram Current Capability" =...
  11. MemTweakIt does not accept the settings

    Hello,

    MemTweakIt does not work, the settings are not accepted.

    Windows 10 x64 1903
    Maximus XI Extreme BIOS: 1302
    MemTweakIt V2.02.44
  12. Hello everybody and Silent Scone@ASUS, Can...

    Hello everybody and Silent Scone@ASUS,

    Can someone please tell me what the memory test software is.
  13. Replies
    19
    Views
    32,427

    Under the PCH, so that the NVME is completely...

    Under the PCH, so that the NVME is completely covered by the thermal pad. (M.2_1)

    The installation there but made difficult.

    Image:
    81974
    (22)
  14. Have you already run Qfan Tuning in the BIOS? ...

    Have you already run Qfan Tuning in the BIOS?

    You can also set the profile to manual for the respective fan in the BIOS and adjust the entire profile.
  15. In my setup, all chassis fans are connected to a...

    In my setup, all chassis fans are connected to a fan expansion card, from which only the 4 pin PWM cable goes to the "CHA_FAN2" connector of the board. So only "CHA_FAN2" on board is occupied,...
  16. One more thing, If I increase the PC case...

    One more thing,

    If I increase the PC case airflow, then the board will not turn off. If the fans are running quietly and slowly, the board switches off again.

    All this makes no sense. It can...
  17. ROG Maximus XI Extreme Rev 1.02 BIOS: 1105 issues

    Hi,

    Hardware:
    Board: ROG Maximus XI Extreme Rev 1.02 BIOS: 1105
    RAM: 16GB G.Skill Trident Z RGB DDR4-3200 DIMM CL14 Dual Kit (F4-3200C14D-16GTZR)

    3 pictures:
    81884
    81885
    81886
  18. Replies
    3
    Views
    2,894

    ROG RYUJIN 360 issues

    Hi,

    I'm struggling to control a ROG ryujin 360 with Armory Crate software. After restarting the PC, the Smart Mode profiles will not be saved. The speed does not increase under load.

    Radiator...
  19. Replies
    4
    Views
    6,178

    ROG Maximus XI Extreme BIOS parameters

    Hello everyone,

    Have a few questions about certain BIOS parameters. Use this board with BIOS 0805. Run an i9 9900k @ 5GHz all cores, stable at 1.225V and Prime95 29.6 build 2 all runs without AVX,...
Results 1 to 19 of 19