Search:

I did remove the plastic shroud on my Hero. It did reduce the PCH temperature by about 8-10c. Now I am in the mid 60s and never above 70c.

It does leave those LED that lit up the Asus logo bare...

It is meant to be used in emergency, not normal shutdown. Press the power button for normal shutdown.

The reset button will power down the PC.That is what is supposed to do.

If you want to cleanly shutdown the computer (not loosing power), either press the on/off button and release it, or select...

I have this on my Z590 Hero. Fix for me was to use the DAC in my speakers with a USB connection to them. This bypasses the Realtek.

I had the issue with the Realtek optical SPDIF. I expect no fix...

It is a normal condition. You will still receive the errors. Ignore them.

vcore = ACLL*Current - LLC*current (plus other stuff)

ACLL increases vcore voltage with load (current), LLC reduces it with load
DCLL should be set to LLC(in mohm) for correct application ...

I carefully read what you wrote.

The optimized default settings almost always will boot and be stable. Basically are non overlocked standard intel. *You can also choose to automatically have the...

It is a different generation of cpu. Your overclocking settings from the 10700k won’t apply. You will need to redo them. It is best to start from scratch to some level - load optimized defaults and...

No problem here with Windows 11 Pro with Realbench 2.56. Runs fine. Intel machine. Just another data point.

Reason I mentioned it is I recently had to do the Windows activation codes after replacing the processor. I think I hit some threshold of changes LOL. But doing the code thing went fine. Good luck,...

Only other thing I can think of is you might have to reactivate Windows because of the hardware changes. It is not a big deal, but somewhat tedious.

You should be fine wit the already installed OS. If the chipset software recognizes an 11700 it will a 11900. You will need to update your BIOS settings though. Only driver you may have to...

Has anyone with the BCLK/Effective TJMAX post loop issue with 14.1.65.1969 tried 14.1.65.1990 yet to see if it is fixed? I would, but I no longer have the XII board available to test it.

https://www.asus.com/supportonly/rog%20maximus%20xiii%20hero/HelpDesk_Download/

The PCH voltage, which is around 1.8v, is relatively high because it is a supply voltage for a FIVR (Fully Integrated Voltage Regulator) on the chipset that provides a regulated lower voltage to...

I said I dinn't know the difference. I realizes I have not installed MyAsus and there is a BIOS setting that, if turned on, asks you to install it when you boot up, which I also have disabled.
Just...

Why are you asking how people can live with it when you don't even know if "it" will even happen?
You can test it your self.

BTW, Live update doesn't pop-up anything for drivers on my PC. Don't...

There are lots of threads about this on Asus z590 boards. Disabling some of the PCH ports (unused USB, Ethernet. etc), can help a little. And disabling Thunderbolt ports in BIOS reduces the...

Sorry I missed this. I am using a z590 now.

I don't know about WAN, but it works on the wifi.

What have you done to enable it?

It might, but it might not, depending on what the details of the problem are. For official releases from Asus, I wouldn't hold my breath either.

Not really. Tried an earlier version of the 14.1.65 firmware, which had the same SVN so it could be flashed, but it had the same issues.

And that this version has issues as a note.

They are not official from Asus nor are from Asus.

I wouldn't update. The latest version in this post is faulty and you can't go back once you've flashed it. It will make some settings unavailable on your board, like BCLK, Max core Temp and possibly...