Search:

[/QUOTE]

Sorry I have no solution to share on this, I just thought I'd give you the information.



Others have had this issue, link. No idea on solution.

I have used 1950X & 2920X with ZEA...

I wouldn't run 2 or more differing RGB software on Zenith Extreme and Zenith Extreme Alpha. The software can clash with one another, also the Super IO chip can have issues with software which...

I do not think there is anything wrong with your system.

Mine is water cooled, room ambient is ~21.1C. See the blue box in below UEFI screen shots of my system.

83012

Now see when in OS.
...

There is no need for this testing in my opinion. As stated CPU does not idle in BIOS, modern UEFI is like a mini OS and Ryzen/Threadripper will boost in that scenario.



I would update your...

Ryzen/Threadripper does not idle in UEFI it can boost, so you will see higher temp than you'd expect. Get yourself a wall socket power meter and you will see higher power draw in UEFI than when idle...

Below the Q-Code display are Q-LEDs, which one is stuck on?

I have also noted a LED not explained in manual, to the right of it on the motherboard it has "CPU_STATUS" marked, I believe when a...

It's in the usual place.

Advanced > CPU Configuration

83004


[/QUOTE]

Another thing I did to improve 4 dimms stability was to check dimms for which worked best in which slots, an...

The profile is shared to show what can be achieved. As there can be variance between silicon, IMC, etc I can not say the exact same settings will work.

Ref the block diagram.

82985

Ryzen mainstream platform has 24 gen 3 lanes.

4x CPU/Chipset link

4x M.2_1

Previously when I tested HPET/Spread Spectrum by unhiding it I came to the conclusion it does nothing. The Stilt recently tested and shared his information in this post on OCN (Quoted below).

UEFI 2901 has become my fave so far :) .

I'm using 4x8GB with R5 3600+C7HWIFI, UEFI 2801 has been pretty sound, I had noted at times when I expected the board to power down and up on a UEFI...

Use USB Flashback, it should allow you to go back to any UEFI version you like.

Q-Code: 8 can occur for a number of reasons. I have seen it occur even on a crash where CPU is sufficiently powered. I have seen it on flaky OC profile. I have seen it when RAM is having an issue....

AGESA is ABB, SMU FW is 46.49.00 in UEFI 0002M-FIE, I did not mod the SMU FW into UEFI, The Stilt did, I added the other elements to his UEFI as stated in the txt. Besides posting links on OCN I post...

600A AFAIK, 10x IR3555 for VCORE, IR3555 is rated for 60A.

I own/owned from launch:-

i) ASUS ROG Crosshair VI Hero
ii) ASUS ROG Zenith Extreme
iii) ASUS ROG Crosshair VII Hero Wifi
iv) ASUS ROG Zenith Extreme Alpha

I do at times runs of say...

Unfortunately not on ASUS offical support page, Shamino aka Peter Tan shared it in this post, if link doesn't work I can share one.

Reads like the Super IO Chip is crapping out.

The Super IO Chip (IT8655E) has issues with the way and number of apps that access it. ASUS to mitigate the issue brought out ASUS WMI. This is a two...

https://rog.asus.com/forum/showthread.php?113004-CH-VII-amp-3900X-high-vcore-in-BIOS&p=783801#post783844

Just to clarify @Rebe1 has guided to use "max frequency overdrive: 100 MHz" that enables AutoOC, OC stands for Overclock/Overclocking AFAIK, below is example for you to reference, please see the blue...

Try this UEFI, you'll find it allows lower % plus increased CPU temp limit for fan profile, link.

SMU FW v46.34.00 did gain me back performance as well as CPU MHz.

SMU FW v46.49.00 is using ~25mV MAX and ~10mV on average for CPU Core Voltage SVI2 TFN for same CPU/RAM OC.

See WMVs in this...

My ZIP link contains files for both boards.

I can't say I have noted a bug with CPU-FAN header.

It shouldn't matter you have 2 differing fans on same header. When header is in PWM mode the 12V is constant, the PWM signal will be (xx)%, the...

The Stilt posted C7H/C7HWIFI UEFI 0002 with SMU FW 46.49.00 here.

I have added some extra mods to them, see readme in ZIP linked in this post.