Search:

Type: Posts; User: NemesisChild

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    4
    Views
    272

    Did you set it on manual, offset, or adaptive?

    Did you set it on manual, offset, or adaptive?
  2. Yes testing at default bios setting is critical...

    Yes testing at default bios setting is critical to determining stability issues.
  3. What I meant did you reinstall Windows when you...

    What I meant did you reinstall Windows when you switched?

    This is a must especially when you move from one chipset to another.
  4. Replies
    9
    Views
    570

    Have you adjusted the LLC setting in your bios?

    Have you adjusted the LLC setting in your bios?
  5. Did you reformat Windows when you switched from...

    Did you reformat Windows when you switched from the Z370 to Z390 chipset?
  6. Always do a fresh install of Windows when...

    Always do a fresh install of Windows when swapping out motherboards with different chipsets.
  7. Two entirely different settings. Please enable...

    Two entirely different settings. Please enable fast boot in the bios.

    It's there. Control Panel, Power Options, Choose What the Power Buttons Do.
  8. Try disabling (uncheck) fast srartup in the...

    Try disabling (uncheck) fast srartup in the Control Panel under Power Oprions.
  9. Try loosening the cold plate on your CPU cooler....

    Try loosening the cold plate on your CPU cooler. It can cause memory issues as you describe if it's too tight.

    Good luck!
  10. Replies
    16
    Views
    999

    Yes LLC 4 or 5 should suffice with higher...

    Yes LLC 4 or 5 should suffice with higher voltages.
  11. Replies
    16
    Views
    999

    Hello and welcome to the forum! First of all,...

    Hello and welcome to the forum!

    First of all, your "overclock" isn't really considered an overclock since the stock turbo frequency is 4.7GHz.

    Secondly, I don't think you meant 1.84v otherwise...
  12. In your system info listing, you state "dual...

    In your system info listing, you state "dual channel unknown" What do you mean?

    As mentioned above, clear the CMOS. If you don't know how to, google it or refer to your mobo manual.
  13. Yes completely safe, nice job!

    Yes completely safe, nice job!
  14. The sweet spot is 3200MHz with CL14 timings. ...

    The sweet spot is 3200MHz with CL14 timings.

    If you don't need 32GB, go with 2x8GB sticks. They are much easier to OC, even versus 2x16GB sticks.
  15. It's a luck of the draw. 3000@ CL 14 should be...

    It's a luck of the draw. 3000@ CL 14 should be doable.

    Up the DRAM voltage to 1.40v and if stable, back it down to a level where it remains stable.

    BTW, good luck with 1T. You will probably...
  16. It is not good practice to combine unmatched sets...

    It is not good practice to combine unmatched sets of memory, even if it's the same brand and model.

    When it comes to system stability and peace of mine, always use matched sets.
  17. IBT basically stresses the CPU and not much else....

    IBT basically stresses the CPU and not much else.

    RB is more realistic in that it stresses the entire system: CPU, graphic card, and memory.
  18. Since you manually set the frequency, did you...

    Since you manually set the frequency, did you also enter the base timings and DRAM voltage?

    If you're not familiar or comfortable doing this, then try enabling the XMP profile.
  19. Who told you that? Depends on the component...

    Who told you that? Depends on the component quality and PC usage. PSU performance degrades over time.

    5 years is pushing it for most units let alone 10 years.
  20. 750w PSU should be plenty for your system. How...

    750w PSU should be plenty for your system. How old is the unit?
  21. If could be a hardware issue with the board. If...

    If could be a hardware issue with the board. If you bought it before Christmas then it should still be under warranty.

    I suggest contacting ASUS tech support, they may have you return it for a RGA...
  22. Did you try uninstalling the adapter in device...

    Did you try uninstalling the adapter in device manager and then reboot?
  23. I think you mean bios 0805. Did this also...

    I think you mean bios 0805.

    Did this also happen on previous bios versions? You may need to wait for a new bios version/update to see if it corrects the issue.

    However, there have been other...
  24. Replies
    16
    Views
    819

    Vcore = CPU voltage

    Vcore = CPU voltage
  25. Replies
    16
    Views
    819

    I don't use CB, so I can't comment on your score....

    I don't use CB, so I can't comment on your score.

    However, 89c is pushing the thermal limit. You do not want to go about 91c.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4