Search:

Type: Posts; User: Falkentyne

Page 1 of 4 1 2 3 4

Search: Search took 0.00 seconds.

  1. Replies
    18
    Views
    714

    Memtest86 is not garbage. It's useful that you...

    Memtest86 is not garbage. It's useful that you can determine whether you can boot into windows without completely trashing the boot sector and operating system from extreme instability. If you can...
  2. Replies
    2
    Views
    1,418

    That isn't degradation. That's simply the CPU...

    That isn't degradation. That's simply the CPU wearing down with time as all chips do. Each and every chip will lose its max overclock over time. You are not going to have the same clock 2 years...
  3. Idle clock speed is supposed to be 4.7 ghz...

    Idle clock speed is supposed to be 4.7 ghz without C-states if turbo boost ratios for each core loads are not set separately. 4.7 ghz is the 8 core turbo boost load speed. If default turbo boost...
  4. Did you install windows from scratch? If not,...

    Did you install windows from scratch? If not, that's your first mistake. Windows installs do not always play well with motherboard swaps. Sometimes they do, sometimes they don't.

    If you did...
  5. I'm telling you. RMA the chip. It's a 9900KS,...

    I'm telling you. RMA the chip.
    It's a 9900KS, not even stable at 9900k stock settings...(much less 9900ks stock settings).
    You're testing RAM. RAM isn't the problem.
    40k FMA3 doesn't even access...
  6. You are running a 9900KS at 4.7 ghz (basically,...

    You are running a 9900KS at 4.7 ghz (basically, stock 8 core turbo boost ratio speed for a 9900k) and getting wrong residuals in LinX?
    But getting correct residuals when XMP is disabled? And...
  7. That's not how you check idle VID btw. And idle...

    That's not how you check idle VID btw. And idle vcore is irrelevant. We're talking about VID here.
    To check base VID, you must disable all power saving and used a fixed voltage. Then set AC/DC...
  8. Got it. FMA3 is a subset of AVX2. If you...

    Got it.
    FMA3 is a subset of AVX2. If you disable AVX2 in the stress test options, it will test AVX.

    Try 112K in-place FMA3, and see if that fails faster.
    112K is even more brutal. It draws...
  9. Wow, you should RMA that chip. A VID of 1.210v...

    Wow, you should RMA that chip.

    A VID of 1.210v (with AC/DC LL of 0.01) puts it at the worst bin for 9900KS. :/ The lower the VID shown, the better the silicon quality. That bin is equal to an...
  10. I've seen chips lose a little of their "absolute...

    I've seen chips lose a little of their "absolute minimum" voltage right after use (meaning the voltage has to be raised after about a week), but it usually stops after about 15-20mv after a week or...
  11. Set VCCIO to 1.20v. VCCSA to 1.25v, PLL...

    Set VCCIO to 1.20v. VCCSA to 1.25v, PLL Terminiation to 1.10v, Internal PLL Voltage to 1.0v, PLL Bandwidth to level 0, Standby voltage to 1.05v then test again.
  12. Replies
    51
    Views
    6,428

    Did you clear cmos after flashing?

    Did you clear cmos after flashing?
  13. Yep your numbers are correct. Surprised that...

    Yep your numbers are correct.
    Surprised that LLC5 is 1 mOhm instead of 0.8 mOhms. Default vdroop for 8 core CFL is 1.6 mOhms, so a -50% vdroop would be exactly 0.8 mOhms. That is what Gigabyte's...
  14. Replies
    51
    Views
    6,428

    Did you forget to set Standby voltage (VCCST)...

    Did you forget to set Standby voltage (VCCST) manually to 1.08v so it's not 1.60v when you go past x52 multiplier, and CPU PLL OC Voltage (may be called PLL Bandwidth in your BIOS) so it's 1.20v and...
  15. Replies
    2
    Views
    205

    Enable Sync All Cores, and then set a CPU...

    Enable Sync All Cores, and then set a CPU multiplier. You can also disable Intel Turbo Boost Technology.
  16. There's no "CPU PLL OC Voltage" setting in the...

    There's no "CPU PLL OC Voltage" setting in the BIOS?

    You get clock watchdog timeout (clock signals just freeze) when PLL OC voltage is too low. You can trigger that by setting a PLL OC voltage of...
  17. Replies
    10
    Views
    781

    You are not the first to have had CPU's just...

    You are not the first to have had CPU's just suddenly die like that. In most cases where this happened, it was always the CPU that died, as a replacement worked fine, but no one determined why it...
  18. Vdroop is how much your voltage drops BELOW the...

    Vdroop is how much your voltage drops BELOW the voltage set in BIOS. Your "minimum" voltage reading (if C-states, power saving, speedshift, etc are all DISABLED) is your maximum vdroop. So your...
  19. There is such a thing called vdroop. Vdroop is...

    There is such a thing called vdroop.
    Vdroop is exactly equal to "VRM Loadline mOhms * CPU Amps current"

    On the 9900k, LLC High (= LLC5 on Asus) is 0.8 mOhms and LLC Turbo (=LLC6 on Asus) is 0.4...
  20. Ok. Then simple: Use VR VOUT for your voltage...

    Ok. Then simple: Use VR VOUT for your voltage reading.
  21. Your Vcore in that screenshot is 1.24v-1.293v....

    Your Vcore in that screenshot is 1.24v-1.293v.
    Use VR VOUT on Gigabyte boards to monitor. And this is an Asus forum. Did you really expect Gigabyte users to be here? :)

    Asus maximus XI boards...
  22. Mike, this is totally off topic, but were you a...

    Mike, this is totally off topic, but were you a Street Fighter or Chess player ?
  23. Replies
    6
    Views
    928

    You don't need to disable cores. People only do...

    You don't need to disable cores. People only do this for things like Super Pi and other world records usually. Disabling cores won't help you at all.
    What you want to do is disable...
  24. Replies
    4
    Views
    348

    D15S with dual 140mm fans (or Noctura 3000 RPM...

    D15S with dual 140mm fans (or Noctura 3000 RPM industrial fans) is the best for air cooling. Of course you can do better but that's in AIO or custom loop water cooling.
  25. Did you disable fast boot in windows power...

    Did you disable fast boot in windows power options?
Results 1 to 25 of 89
Page 1 of 4 1 2 3 4