Search:

Type: Posts; User: Silent Scone@ROG

Page 1 of 20 1 2 3 4

Search: Search took 0.03 seconds.

  1. Hello, A further VBIOS update will be...

    Hello,

    A further VBIOS update will be coming to address the fan threshold. Expect it to drop on the support pages within an ETA of a month's time.
  2. Replies
    6
    Views
    266

    Hello, A further VBIOS update will be coming...

    Hello,

    A further VBIOS update will be coming to address the fan threshold. Expect it to drop on the support pages within an ETA of a month's time.
  3. Replies
    221
    Views
    18,671

    Either Ryzen Master or HWInfo depending on what...

    Either Ryzen Master or HWInfo depending on what sensors you wish to monitor.
  4. Hi, Having used a GEN 3.0 riser cable (@ GEN3)...

    Hi,

    Having used a GEN 3.0 riser cable (@ GEN3) with an RTX 3080 on the CH8 and using GEN 4.0 conventionally, the performance was within margin of error.
  5. This is because the board is posting in safe mode...

    This is because the board is posting in safe mode as you're at the edge of stability (as Shamino mentioned).
  6. Hello, The CPU is very unlikely to be faulty....

    Hello,

    The CPU is very unlikely to be faulty. You need to tune the memory or revert to an UEFI that is more stable for the time being with the kits in question.

    Use Karhu Ram Test to establish...
  7. Hello, Unfortunately, mixing memory kits is...

    Hello,

    Unfortunately, mixing memory kits is often ill-advised for this very reason as the memory vendors bin the kits in the density they are sold in. As a result, they is no guarantee they will...
  8. As long as you're confident mounting pressure is...

    As long as you're confident mounting pressure is fine, then there's nothing untoward about those temperatures. Anything up to 10 degree in variance is not uncommon.
  9. Replies
    221
    Views
    18,671

    Not everyone is experiencing the same issues as...

    Not everyone is experiencing the same issues as you are, so the route cause is unclear for individual cases. I have no instability issues on my CH8 / 5950X setup whatsoever on any of these builds...
  10. Replies
    221
    Views
    18,671

    I would highly recommend anyone experiencing...

    I would highly recommend anyone experiencing instability problems to shift to Karhu RAM Test version 1.1.0.0 or greater. This is by far the most effective memory stress test for Zen-based platforms...
  11. I would highly recommend anyone experiencing...

    I would highly recommend anyone experiencing instability problems to shift to Karhu RAM Test version 1.1.0.0 or greater. This is by far the most effective memory stress test for Zen-based platforms...
  12. Replies
    2
    Views
    361

    According to AMD the feature is set to debut in...

    According to AMD the feature is set to debut in AGESA revision 1180.
  13. Hello, I would first double-check that the cooler...

    Hello, I would first double-check that the cooler is correctly seated with even mounting pressure and that the pump is running. HWinfo should display speed via the attached header.
  14. Replies
    221
    Views
    18,671

    Switched from 3950 to 5950X here on the CH8 and...

    Switched from 3950 to 5950X here on the CH8 and not experienced those problems. You may want to reinstall Armory Crate, also make sure the system is stable. Memory instability can cause the lighting...
  15. First-generation was certainly not without its...

    First-generation was certainly not without its problems, however, Zen has matured to a point where a seasoned enthusiast should have no trouble navigating any platform-related quirks quickly if any...
  16. You are confusing another feature entirely. Smart...

    You are confusing another feature entirely. Smart Access Memory has absolutely nothing to do with the Dynamic OC Switching on the Dark Hero.
  17. Hello, The best method is to use either the...

    Hello,

    The best method is to use either the Water Out or Water In temp headers to install a 10K Ohm sensor to monitor coolant temp. That way, via Q-FAN configuration in the UEFI you can adjust...
  18. Replies
    221
    Views
    18,671

    07 is likely memory timings. May want to work on...

    07 is likely memory timings. May want to work on secondaries, or increase CAS one clock. May also need to increase SOC voltage.
  19. Replies
    4
    Views
    1,884

    PM with your preferred username.

    PM with your preferred username.
  20. Thread moved to the correct section. Those...

    Thread moved to the correct section.

    Those temps don't seem excessive. Might want to check mounting pressure if anything. I see 85c with custom cooling in CR20 with 5950X simply by enabling PBO. ...
  21. Hello, I'm not sure I understand the question...

    Hello,

    I'm not sure I understand the question if there was one. The CH8 Hero is not a new board. If changes are required in order to facilitate new features, this is something that cannot be...
  22. Replies
    2
    Views
    65

    Hello, please let me know the username you...

    Hello,

    please let me know the username you would prefer and I'll get this changed for you.
  23. Hello, I've tested the portal feature in the...

    Hello,

    I've tested the portal feature in the link I provided and it appears to be working for myself so it's unclear why it was not working for you.

    In your case I manually added the photo for...
  24. Hello, the dynamic OC feature required PCB...

    Hello, the dynamic OC feature required PCB changes and will unfortunately not be finding its way to older boards.
  25. Replies
    221
    Views
    18,671

    Yes, use Karhu or Google Stress App Test....

    Yes, use Karhu or Google Stress App Test. Memtest86 is redundant.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4