Search:

There is big chance they change name for some reason, but I have Z490 and my chipset voltage is PCH Core and its 1.050V. I don't see any voltage at 1.8V on my motherboard. And if on Z590 chipset...

I don't know how precise is HWinfo for new Z590 series. But i assume that PCH VCCin is same as for Z490 (I have) PCH core. And on Z590 you have 1.8V and my Z490 have 1.040-1.060V. I think that is...

There are multiple Temp sensors not just for CPU. So you could really be unlucky and have some massive temp spike during reboot or is it weird temp sensor inside CPU or motherboard or bug bios (did...

hey.
Try download HWinfo and check all temp sensors. Ryzen CPUs are known for having higher Vcore than we are use to from Intel CPUs. and from what you are saying you have good temperature under...

Well Asus is bad company that is topic for another day...
The motherboard support page is working for me. And little tip nex time you could use different B460 mobo for base drivers and (asus...

Did you know that on Support page for your Mobo next to Driver Tab there is CPU/Memory Support Tab? So easy just look there

Hi.

If you want OC 7700k you need delid it or you will have bad time with temp. i dont know what you playin but in the end it depend how good you CPU silicon is so maybe you will gain some or...

First GJ on that 3090.
Second. Well Threadripper 1st gen isn't very good for gaming. And as you said after upgrade you didn't notice any improvement. I betcha you are CPU bottleneck. CS:GO is heavy...

i have G-sync problem on my PG278QR. Monitor works. I send it just for firmware update, they didnt update it, they just perform test that monitor works for some god know what reason (and yea monitor...

Yes. From reviews looks like Asus equip only Extreme with necessary hardware. But let's be honest average consumer dont need PCIe GEN4.

Well i have USB-C DVD-rom and on my new case with front USb-C it looks fine

Well next week will arrive my new case that has front usb-c so we will see

Bigger PSU would be nice of course but good 650w is still good. That overvolt jumper is only for extreme OC so dont worry about it

well. my Rampage VI apex with 3006 bios still support i5 7640x so that is weird statement by Intel, but when i bought 9800x, some youtuber recommended to reset CMOS every time you change SkyLake-X...

Yes CPU power delivery on original Hero there are 60A power stage on new are 90A. So it has better VRM

I have apex too and 0707 and my USB works fine

It is not the same card but i think it will work the same https://www.asus.com/Motherboard-Accessories/ThunderboltEX-3/

I just take look at M12E home page and if you look at performance tab - memory - maximum capacity they show 4x32GB max 3600MHz and for just 2 sticks 4800+MHz so go figure...

Lets say THUNDERBOLT...

I wonder if that revision A14 is intel i225-v B3 revision, or if asus just applied the firmware right from factory. Because i did update my from day one ( on apex ) and never had problem with...

did you try all sticks in different position? (no) just try one stick each in diffrent position. if this not help, could you try different RAM, CPU or MOBO ?

Do you have another memory kit ? maybe you could borrow from friend.

53 should be - Memory initialization error. Invalid memory type or incompatible memory speed

33 - CPU post-memory...

few bend pins in USB connector.. ok do you using that? a scratch from screw? really???? scratch in place where you tighten a screw. Yeah that is totally worth $300.

If you are testing stability always do it one by one. First oc cpu to max then add RAM. Or ram then cpu if OC both its hard to diagnos. So put yor cpu to stock. And lets say your XMPvoltage is 1.5V...

0704 so far good for lots of people. 0607 has default LLC 7 in my case, like Asus what? So i was wondering what other crap is inside.

QVL is just gimick you can buy non QVL and it could be better...

You should try update 0704 from first page. And if you try one by one and if it will have zero error the problem could be your CPU IMC(memory controler) or return them and try new one if you still...