Search:

Checked it out again after work yesterday and i believe i have made a mistake. The cable that is on the picture is a pcie cable and this is the connector that goes into the psu. I was too quick to...

Well if the connector fits it’s supposed to be there is it not ? I mean can any other connector fit in the EATX12v ?

Hello guys!

I have a R5E and i just got custom MODDIY cables. One thing that bothers me is that on the cable that goes into the EATX(8pins) there is one pin missing on the connector that goes into...

Hello,

Yes it is worth noting that i was able to use the 100mhz strap on 2*** and now can't. I've tried many time and i can't really go over 2400/2666mhz on 100mhz now. Must use the 125mhz. I...

Hey,

Just installed it, i had to spare time and felt like switching from 2*** to 3**** series and i must say it went quite well. I remember when i got the board we were at 5** or 6** series for...

Hey,

Yea well wouldn't it be something like QC55 or another code if the ram wasn't detected ? If the ram is detected and there's a BS code it's weird but unlikely that "wiggling" it will solve the...

Hey,

Having an OSD also triggers this kind of behaviour. Just so you know, arne is right.

Max

Hey Raja,

Thank you for your input. Well noted.



Hey Vlada!

Yes i was looking into that sound card earlier. It's still on my list amongs other sound cards, if it comes to that.

Hello Menthol,

Thanks for your reply. Have you ever tested the 5.1 surround ? If so, did you compare the analog vs the spdif ? I'm not sure yet which one works best for compatibility and for the...

Hey guys!

Just wondering if the onboard chip is good enough for me to enjoy the Z906 at it's fullest potential in games ? Or should i go the dedicated pcie audio route ?

Thanks for the input!
...

Hello,

English is not my primary language yet i find that it is quite sufficient for forum purposes. You say i have no brain yet you do not type/speak enligsh which is not only THE language but...

Hello,

I am not a post hunter like you say. I have seeked help many times when the board originally came out and from what i've learned fron raja, praz and others, i've tried to pass it back to...

Hello,

Had to sign in for this (took a pause from the forums). You say you're not a noob YET you quote asus' memory oc specs as if you were supposed to achieve them. You also proceed to blast a...

Hello,

I've had that issue with a couple of bioses, can't remember which one, modded bioses would trigger that Q-Code too. Only bios i found that wouldn't trigger it was 2101(at the time, haven't...

Hey,

Sad to see the board was dead on arrival.

Max

Hey,

Cheers! Glad you fixed it! Have fun now :)

Max

Hey

Whenever it hangs next time make sure you not down the qcodes. Had a friend with an old usb device that would trigger a "79" for 2mimutes. Annoying.

Max

Hey,

Can you test another memory set ? I remember getting Q-Code 53 when i was combining kits. As soon as i would use a factory paires kit it would work. Get a cheap 50$ kit from newegg or...

Hey,

The board probably hangs on a qcode. I'd bet because of an usb device. What qcodes do you see ?

Max

Hey Starling,

Have you tested your memory with stock config ? No xmp?. If you leave it stock, do you see all your ram ? If so, means you gotta tweak the system agent.

Max

Hey!

I'd say, if your computer is connected via an etherner cable, try disconnecting it. I've seen a couple times routers sending packets that would wake the computer. Worth a try.

Max

Hey,

Yes apps can, you just have to set an appropriate pagefile.

Max

Hey,

There was a storm (lightning) today in montreal, canada. We got some power failures at home. Wifey called me to tell me that after a power failure, computer booted up and shutted down 1 sec...

Hey praz,

Thank you for clarifying. But could you shine some light on why my 950 pro performances were really low when not using their drivers, and that was in everyday applications. I think it...

Hey,

Yes they have their own drivers. I've tested with AND without their drivers. I haven't seen any difference whatsoever in performance (atto and in-house ocz tool). Although this could be...