Search:

Type: Posts; User: Shamino

Page 2 of 20 1 2 3 4 5

Search: Search took 0.01 seconds; generated 50257 minute(s) ago.

  1. raja is right but since you're manually...

    raja is right but since you're manually over-riding it doesnt matter if its auto or best case, you will get your specified 0.04


    The other question is regarding the cache ratio. I'm trying...
  2. Replies
    10
    Views
    636

    prediction is a suggestion which will get applied...

    prediction is a suggestion which will get applied IF & ONLY IF ratios are customized to a user value, ie not equals auto.
  3. Replies
    10
    Views
    636

    Have question about NonAVX and AVX req...

    Have question about NonAVX and AVX req for........MHZ
    it depends on cpu used and cooler score.
    and also xxxmhz of cos

    without changing the cpu:

    Non-A V req for xxxmhz 1.26 @ 125 cooler pts...
  4. So I was curious what was happening here for...

    So I was curious what was happening here for sure.
    Is it the transient response (causing the load voltage to keep dropping below VMIN at such high LLC, even though the average voltage is higher?).
    ...
  5. I know that LLC7 is the minimum stable LLC for...

    I know that LLC7 is the minimum stable LLC for manual mode, I've tried LLC6 and increased target voltage to compensate but it just won't be stable.
    => you mean adaptive right? and at 50x ratio...
  6. welcome to adaptive voltage understand the...

    welcome to adaptive voltage

    understand the criteria for adaptive voltage to take effect :

    per intel design:
    1) adaptive voltage only takes effect at ratios > max single core boost ratio which...
  7. just wanted to make sure the criteria for...

    just wanted to make sure the criteria for adaptive voltage to take effect is fulfilled.

    per intel design adaptive voltage only takes effect at ratios > max single core boost ratio which is 44x in...
  8. Hi I couldn’t repro , fans only spin for a short...

    Hi I couldn’t repro , fans only spin for a short moment during the part of booting before bios menu for me.
    The header is on a 4 pin right beside the cpu fan headers could it be that you somehow...
  9. I would simply set ratio to 51x ,everything else...

    I would simply set ratio to 51x ,everything else auto, observe what prediction pane says v req for 5100 non avx, save exit with vcore auto, and start with some cinebench runs to check stability and...
  10. What I meant was that there's nothing wrong with...

    What I meant was that there's nothing wrong with your board, just that new bios hides 200% unless ln2 mode is enabled(meaning you move the ln2 jumper) as 140% is more than enough for normal oc
  11. 200% was only useful for ln2 so at 0602 it only...

    200% was only useful for ln2 so at 0602 it only appears when ln2 mode is enabled. do you ever hit ocp under normal cooling with 140%?
  12. Replies
    9
    Views
    1,278

    Remove one stick at a time till it goes away,...

    Remove one stick at a time till it goes away, resea t that stick / reseat that stick in a different slot, if still no, sounds like a stick that wouldn't do the freq
  13. Replies
    7
    Views
    3,579

    you can find it here...

    you can find it here
    https://drive.google.com/file/d/1tgRwOjxeHanJU5P-8bBmfbH_8tEDVzCJ/view?usp=sharing
  14. Replies
    8
    Views
    1,662

    yes, simply put check the graph by elmor, blue is...

    yes, simply put check the graph by elmor, blue is the 'traditional' reading you are used to (also on other no Max boards),, orange is the current max v reading, green is actual cpu 'die' v,, the 12mv...
  15. Replies
    8
    Views
    1,662

    What you mean is software reads lower than what...

    What you mean is software reads lower than what you are used to . It is routed to read directly from cpu die sense this gen , pls read the explanation of die sensing ...
  16. Replies
    19
    Views
    1,125

    ive tried this, this is not a bug, seems like hw...

    ive tried this, this is not a bug, seems like hw defect, see if u can replace it.
  17. Replies
    19
    Views
    1,125

    i'll look into this, it sounds like just a hw...

    i'll look into this, it sounds like just a hw monitor bug with the new bios. so if you just load defaults come back into bios, vccio reading is much lower than the default 0.95v?
  18. Replies
    15
    Views
    16,021

    Sticky: This also raises the question, is 'stock...

    This also raises the question, is 'stock performance' absolute in today's context? with TVB and XFR on AMD, frequency depending on power and power on temps, tests carried out on an air cooler will...
  19. yes it uses the last successful result if no...

    yes it uses the last successful result if no changes are made.
  20. Replies
    15
    Views
    16,021

    Sticky: MCE explanations and others

    MCE

    I’m seeing quite a lot of misunderstanding the workings of MCE so I’m partly writing this to address it.
    It is not the taboo that it has been made up to become. There are 3 options for it,...
  21. If it's mem oc related under dram timings right...

    If it's mem oc related under dram timings right at bottom set mrc fast boot to enabled
  22. sounds like nvidia drivers with s4 resume , you...

    sounds like nvidia drivers with s4 resume , you can try disabling s4 https://www.cnet.com/how-to/how-to-enable-or-disable-hibernate-in-windows-10/
    and then see if there are drivers that work...
  23. try to isolate if its dram or cpu oc by first...

    try to isolate if its dram or cpu oc by first setting xmp back to manual and default dram frequency.
  24. hi if im not wrong this will be the temp you see...

    hi if im not wrong this will be the temp you see in hw monitor of bios/ai suite, which is an calibrated temp factoring in thermistor and core temp.
  25. this sounds like weaker memory controller, which...

    this sounds like weaker memory controller, which is fed by System Agent, have you tried higher SA, like 1.45~1.55v?
Results 26 to 50 of 500
Page 2 of 20 1 2 3 4 5