Search:

Type: Posts; User: Rob W.

Page 1 of 20 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    8
    Views
    449

    Well I got the board back ! In a box wrapped in...

    Well I got the board back ! In a box wrapped in thin bubble wrap, no original box,fittings,cables or accessories that I sent it off with,!
    I contacted ASUs UK , they won’t cover it under rma unless...
  2. Replies
    8
    Views
    449

    Hi guys, just an update on my board. As you know...

    Hi guys, just an update on my board.
    As you know I returned board in March, probably 15-20 emails later board is now in customs on its way back to me from Canada.
    WHAT A SAGA!
    Uktechstore accepted...
  3. hi DeeEM *I believe about six months into...

    hi DeeEM
    *I believe about six months into warranty, ASUs did state if I had problems with the supplier to get back to them but this was not needed,
    Amazon’s three month return is for direct...
  4. I had to rma my board in March , ASUs sent me...

    I had to rma my board in March , ASUs sent me exactly the same response, so I contacted uktechstore where purchased and sent them the ASUs reply email.
    They accepted the return to themselves quite...
  5. Replies
    8
    Views
    449

    I’m wishing I hadn’t given my M8e to my son now....

    I’m wishing I hadn’t given my M8e to my son now.
    It’s just not the same using an iPad :o*
  6. Replies
    8
    Views
    449

    Thanks Arne, will do.:)

    Thanks Arne, will do.:)
  7. Replies
    8
    Views
    449

    Board has different Sn to box.

    Six or eight months ago I had to return my R6E, unfortunately I am in the process of returning the replacement .
    I have been asked for the Sn and when checking it appears the board has a different...
  8. Thread: GPU Tweak 2

    by Rob W.
    Replies
    1
    Views
    276

    Hi Dalibor, from my experience gpu tweak 2 has...

    Hi Dalibor, from my experience gpu tweak 2 has problems when using multiple monitoring software, I tend to use Msi afterburner for setting up gpu and OSD*
    It works fine.
    It could be the other...
  9. Hi Counteragent,* On the R6e you have to release...

    Hi Counteragent,*
    On the R6e you have to release the pcie lock ( allowing the card to come forward slightly) then you can slide the over out,
    I believe the Omega is the same situation but I’m sure...
  10. Replies
    1
    Views
    231

    IHS after 12 months with LM

    Just recently stripped rig and thought I’d share this!
    Nothing sugested by it but I have now swapped to mx4 Tim.( for the time being?)
    79638
    79639
    There does seem to be some pitting going on, ihs...
  11. Replies
    7
    Views
    351

    Live0rDie, yes that was the first thing I tried...

    Live0rDie, yes that was the first thing I tried after scouring the internet sites for any clues, tried both bios 1 and 2 1503 on 1 and 1704 on 2 so I don’t believe it was that, I then plumped for the...
  12. Replies
    7
    Views
    351

    By the way splashes were on the psu. *Well that...

    By the way splashes were on the psu.
    *Well that was mentally exhausting but fault found.
    Stripped everything down pins=ok, delid = ok powered up and= cpu code 00 no boot .
    Re seated cpu again and...
  13. Replies
    7
    Views
    351

    I don’t think so Arne but I have completely...

    I don’t think so Arne but I have completely stripped it down, pins, cpu Tim all good, cleaned all connectors and rebuilt double checking everything, so it’s just down to powering it up and fingers...
  14. Replies
    7
    Views
    351

    Due to my lack of electronics knowledge:rolleyes:...

    Due to my lack of electronics knowledge:rolleyes: I have checked out and tried everything I can think of and still C Chanel not working, So!
    It looks like I shall be dismembering it again and set up...
  15. Replies
    7
    Views
    351

    Strange memory recognition problem, solved..

    Hey guys, with bios 1503 I had 64gb of ram running ok at its proper specs, then I loaded 1704 and suddenly bios only recognised 32gb also xtu only sees 32gb on channels B1,B2 and D1,D2 . A and C...
  16. Replies
    3
    Views
    1,170

    Thanks ttOne and good jab383 , still unfamiliar...

    Thanks ttOne and good jab383 , still unfamiliar with rules? Will read again and maybe watch a few how to vids.
    Just trying to get ROG a few points.:D
    *
  17. Replies
    9
    Views
    426

    Both my R6E + an rma one arrived , no shrinkwrap .

    Both my R6E + an rma one arrived , no shrinkwrap .
  18. Replies
    3
    Views
    1,170

    2019 challenge stage ii ?

    I see stage ii is 1 to 6 cores,
    being new to submitting scores does this mean I have to disable 12 cores on my 7980xe before running tests:confused:
  19. Replies
    8
    Views
    435

    Ok! I got 5ghz:D but it wont run everything at...

    Ok! I got 5ghz:D
    but it wont run everything at that oc,, Not that I would want it to, not with the voltages I had to use:rolleyes:
    So after days and nights of further testing I have found this...
  20. Thread: Benchmark Test

    by Rob W.
    Replies
    7
    Views
    283

    I tend to use realbench combined with hwinfo for...

    I tend to use realbench combined with hwinfo for initial testing for stability, if it passes that *then it will be good for running other stuff!
    From there I tend to use cinibench to check cpu Oc ...
  21. Replies
    10
    Views
    1,025

    thought I would share my last run tonight with...

    thought I would share my last run tonight with 419.35
    79328
  22. Replies
    10
    Views
    1,025

    hi Nate good to see you back, my results were...

    hi Nate good to see you back, my results were very similar about 8 points lower with 419.35 than 419.17 in both 4K and 8K.
    unfortunately site says my uploads are failing,??
  23. Sorry to hear yo still have problem, as rython...

    Sorry to hear yo still have problem, as rython says try on the left ( I’ve never had that problem) it might solve it.:)
  24. Replies
    8
    Views
    687

    Hi rython, I’m using all 8 slots ( 8x8gb ddr4...

    Hi rython, I’m using all 8 slots ( 8x8gb ddr4 3600hzs *GSkill rgb ) quad channel,they are running at 3800hzs 15-15-15-34 stable.
    I have noticed in bios channels a,b voltages slightly differ from...
  25. Replies
    8
    Views
    435

    haha I think I saw that film when it was first...

    haha I think I saw that film when it was first released Arne :)
Results 1 to 25 of 477
Page 1 of 20 1 2 3 4