Search:

Type: Posts; User: Falkentyne

Page 1 of 5 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    11
    Views
    256

    As Bass junkie said, AIDA64 puts a rather...

    As Bass junkie said, AIDA64 puts a rather balanced load on the CPU. It isn't a bad tester but you have to rely on more than one test.
    I came up with minecraft "Spam" loading myself.
    My testing...
  2. Replies
    11
    Views
    256

    I agree with you. However there are some cases...

    I agree with you. However there are some cases where you are temperature limited and can't run AIDA64 at all, because AIDA64 "Stress FPU" (the test you want to run normally), uses AVX instructions,...
  3. Replies
    6
    Views
    591

    I think every BIOS these days can be considered...

    I think every BIOS these days can be considered beta :) Found and reported Bugs have to constantly be fixed and Intel redesigning power limit TAU or turbo boost timers...
    The true beta bioses tend...
  4. Replies
    11
    Views
    256

    One way to VERY quickly determine if you are...

    One way to VERY quickly determine if you are unstable is to use java minecraft, if you own it.
    Run HWinfo64 in sensors only mode and go to WHEA area.

    Then load minecraft to main menu about 20...
  5. HI Kayaknate. What frequency are you reading...

    HI Kayaknate.

    What frequency are you reading the predictions from?
    I don't believe I gave specific predictions in my post, except at 5 ghz and below, where the predictions are much more accurate....
  6. Replies
    6
    Views
    591

    Peter is awesome. And my god I love the Asus...

    Peter is awesome.

    And my god I love the Asus Bios!
  7. ---------------------- Thermal Velocity Boost...

    ----------------------
    Thermal Velocity Boost test:

    All auto voltages, Intel spec settings used: 3dmark Firestrike: Cores settled at 4.9 ghz all cores.
    I personally haven't found much use for...
  8. Maximus 12 series and i9 10900k overclocking guide and tech sheet

    Asus Z490 - Bios Done Right.

    Here is an overclocking guide for the Z490 Maximus 12 series.
    This was done on a 12 Extreme, but should apply throughout the series.
    This is based on a 10900k.
    ...
  9. B1? You mean B-die? or dual rank with B1 version...

    B1? You mean B-die? or dual rank with B1 version PCB?
    If that's B-die, you should have no problem using command rate 1T, tightening tRFC (down to 270) and tREFI (up to 65534). There are other...
  10. It's an 8 pin simply split into two 4's. Just...

    It's an 8 pin simply split into two 4's. Just use both of them. This is done for convenience as well as compatibility reasons with older boards that only have a 4 pin. Otherwise you would have to...
  11. Do you know what kind of screws they are? Most...

    Do you know what kind of screws they are?
    Most standard screws can be purchased quite cheaply from Laptopscrews.com, like m2's, m2.5's, etc, of various lengths and head shapes.

    Bizarre screws,...
  12. Are these kits on this board's QVL? I don't...

    Are these kits on this board's QVL? I don't believe they were out when this board was released, and there are still a limited number of QVL 16 GB per dimm kits
    If they are not, you may have to...
  13. Replies
    5
    Views
    122

    The dimm.2 slot shares PCIE lanes with the CPU,...

    The dimm.2 slot shares PCIE lanes with the CPU, so occupying it will force the first x16 PCIE slot to run at x8.
    Rocket Lake CPU's which will also work in your motherboard later will support full...
  14. Replies
    5
    Views
    122

    That is a huge case. If you're using three 2...

    That is a huge case.

    If you're using three 2 TB NVME drives you will need to use the dimm.2 slot for one of them. This will also force the first PCIE x16 slot into x8 mode.
    One of the SATA ports...
  15. All 1151 coolers are compatible with socket 1200....

    All 1151 coolers are compatible with socket 1200.
    The physical dimensions are 100% identical.

    Any incompatibility would be if someone put a cap or something someplace which blocked something and...
  16. Replies
    72
    Views
    7,327

    You need to set your voltages manually. The auto...

    You need to set your voltages manually. The auto rules probably changed between 1401 and 1502, so they can't be compared.
    Also, newer microcodes have caused a drop in CB performance on all ODM...
  17. Replies
    3
    Views
    123

    What dedicated video card are you using? You...

    What dedicated video card are you using? You said you hooked up the displayport to the motherboard, you're trying to use the iGPU, but you didnt show any pictures or list what video card you tried. ...
  18. What Loadline Calibration did you use? ...

    What Loadline Calibration did you use?

    Adaptive voltage cannot be set below the CPU VID.
    I highly doubt an adaptive voltage of 1.2v would work.
    Also if that is not a Maximus XI board, the vcore...
  19. Oh, I forgot about that. However Elmor's chart...

    Oh, I forgot about that. However Elmor's chart isn't based on a heavy load. He took those graphs while idle in the BIOS.
    At a very heavy load, the spikes and dips on both ends will be larger than...
  20. It varies motherboard to motherboard. And each...

    It varies motherboard to motherboard. And each motherboard has different transient response. The evga z390 dark for example is literally in a league on its own. But a board with that good...
  21. I can tell you already right now. LLC1=2.1 mOhms...

    I can tell you already right now.
    LLC1=2.1 mOhms and LLC2 is 1.6 mOhms and LLC6 is SOMEWHERE CLOSE TO 0.4 mOhms (either 65% or 70% reduced vdroop) and LLC8 is 0 mOhms.

    Someone on OCN calculated...
  22. This is a good post. The "best" LLC depends...

    This is a good post.

    The "best" LLC depends purely if you are using fixed vcore or adaptive/offset vcore (with c-states) as this affects your idle voltage, so the CPU can downvolt at idle, which...
  23. Why are you even enabling that setting to begin...

    Why are you even enabling that setting to begin with?
    It just slows down your benchmark speeds if it's enabled and it has some relation to C-states.
    This should only be enabled on laptops to save...
  24. Nice to see you again, Mokichu. How are you...

    Nice to see you again, Mokichu. How are you holding up through this quarantine and pandemic?
  25. Replies
    7
    Views
    281

    The AVX offset is crashing him because his...

    The AVX offset is crashing him because his Non-AVX stability is already borderline (if he were not using an offset to begin with).
    AVX offsets need to be improved by Intel and even they admitted it...
Results 1 to 25 of 119
Page 1 of 5 1 2 3 4