Search:

Hi Rob Ainscough,

I ran into the same issue with my ROG Strix Z690-F Gaming Wifi.

There needs to be 15mm of clearance for the active backplate from the center of the pcie slot, the M.2_1...

With today's reset we are in the final week of Season of Plunder.

96592

I've had my fill of Ketchcrash and Expedition, I'm looking forward to some new events. I hope they saved the best season...

Hello,

Have you guys tried resetting your ROG Claymore II by pressing and holding the Fn+ESC keys for 15 seconds?

Hi lly3ss59,

Let us know if your ram is stable after the bios update.

If it's not stable after the bios update, 64GB 6000MHz cl30 might need some voltage tuning.

These five voltages can help...

I'm not sure about Gigabyte's motherboards but, in the bios try setting the pcie x16 lane for your gpu to Gen 4.

Hello Ipiotrowski211

I used to get the "nvlddmkm stopped responding and has successfully recovered" from overclocking.

Even though you may not be overclocking, try reducing the core clock...

Hello tomerturbo,

To stop the WHEA errors, in the bios...

Advanced tab, Platform Misc Configuration, Disable PCIe Native Power Management.

G.Skill has always been my go to memory but I see no 16GB TridentZ5 DDR5 kits which is what I wanted as no games to my knowledge are recommending 32GB, plus as you stated earlier in your thread,...

I don't think it's fair to blame the motherboard when the memory controller is on the cpu. All cpu's are not created equal, and it seems your cpu's memory controller is on the weaker side.

One...

Ok, updating to the latest bios can sometimes help with memory clocking. I see the latest bios for your motherboard is 0703, it's also recommended to update the ME driver.
...

1.35v for system agent voltage is the upper safe limit. You can try it there and if it's stable you can reduce the voltage until you find what is needed for stability.

For my motherboard, in the...

Hello Xmptroubles

I have the ROG Strix Z690-F Gaming Wifi motherboard with Kingston fury beast 16GB 6000MT/s CL40.

Out of the box X.M.P. didn't work for me either, I had to raise five...

Does it happen in both wired and wireless mode?

Something to try is, in the keyboard properties try setting the Repeat delay to Long.

96468

If this doesn't help, would you have another...

All right, I tested my my ROG Chakram X in wireless mode to compare to your ROG Keris.

To me they look fairly similar.


https://www.youtube.com/watch?v=PMWcs5iX9E4

Hello Patricks

Welcome to the ROG forum.

Did you do a fresh windows install?

It's recommended to do a fresh windows install when upgrading your motherboard to avoid any driver conflicts.

Hello suddre

Welcome to the ROG forum.

You need an ROG compatible cpu cooler to control it from Armoury Crate.

You'll have to use Gigabyte's software.
...

Hello Wolfyx

Right click on the AC Power Notification and click Exit.

Or, on the task bar click the time and date, at the top you'll see Notifications, click Clear all.

96542

You'll need to save the gif to your pictures, then insert it in Armoury Crate.

Did the video above help?

Hello Horizontalline2

Have you tried reseating your gpu?

Hello ugo73

Yes, it's possible to add animated gifs.

I have the ROG Delta S Animate headset and it only does black and white, bright white images have the best image quality.

Here is a video...

Hi cekeu,

I never had any problems with my ROG Chakram X, it's still working flawlessly after today's update.

Nice, good to hear your ROG Strix LC II 280 ARGB came with a socket 1700 mounting bracket.

It's sounding like you're on your way to building a nice gaming pc.

I had an update for my three ROG mice this morning.

Open Armoury Crate and check for updates to see if this might solve the problem.

Thank you,

Have you tried contacting your internet provider to see if they might have a solution?

Here is another article on packet loss.

https://pandorafms.com/blog/packet-loss/

What modem do you have?