Search:

Type: Posts; User: Silent Scone@ROG

Page 2 of 20 1 2 3 4 5

Search: Search took 0.04 seconds; generated 94254 minute(s) ago.

  1. Hello, You will need to tune manually. 7600MT...

    Hello,

    You will need to tune manually. 7600MT needs a 13th gen board and a decent CPU (strong IMC). *Depending on the board, you can try 6600 - 6800MT / 1.42v VDD / VDDQ. Alternatively return the...
  2. Optimised defaults does not apply XMP. Please...

    Optimised defaults does not apply XMP. Please only respond to the thread unless contributing.
  3. if the system is crashing at optimised defaults...

    if the system is crashing at optimised defaults then something isn't right. If possible, take the components to a system integrator to test for you.
  4. Replies
    70
    Views
    11,992

    Please stay on topic if you have a Z790 board in...

    Please stay on topic if you have a Z790 board in hand
  5. Replies
    70
    Views
    11,992

    I bought my Apex from Ebuyer.com when it first...

    I bought my Apex from Ebuyer.com when it first became available
  6. Replies
    70
    Views
    11,992

    Hello, At frequencies where signal margins...

    Hello,


    At frequencies where signal margins can be quite tight, these kinds of assurances simply don't exist. The Z690 Apex technical specification states 6600MT max, Z790 is far higher, not...
  7. Replies
    10
    Views
    1,468

    GPU temps suggest otherwise. A D5 at full tilt...

    GPU temps suggest otherwise. A D5 at full tilt would be able to cope with this.

    Check for mounting contact again, try the latest UEFI release, and report back.
  8. Replies
    24
    Views
    1,740

    53 is a memory initialization error. Check for...

    53 is a memory initialization error. Check for correct DIMM insertion and ensure the CPU cooler is not overtightened.
  9. Replies
    10
    Views
    1,468

    Hello, There's no reason a D5 would struggle...

    Hello,

    There's no reason a D5 would struggle there. What are your 3090 temps under load?

    Check for proper CPU mounting contact and consider using a socket frame such as the Thermal Grizzly to...
  10. Rules change. 13th gen certainly doesn't require...

    Rules change. 13th gen certainly doesn't require as aggressive load-line. Hard to say without directly comparing the two profiles
  11. Replies
    30
    Views
    2,434

    Try raising VDD and VDDQ to 1.30 - 1.35v.

    Try raising VDD and VDDQ to 1.30 - 1.35v.
  12. Replies
    169
    Views
    58,376

    Sticky: 7600MT is the second-highest officially validated...

    7600MT is the second-highest officially validated ratio for the Extreme, so it's possible. The signal tolerance at these speeds can be tight.
  13. Replies
    8
    Views
    403

    Check the GPU is fully inserted correctly into...

    Check the GPU is fully inserted correctly into the PCIE socket as well as the power cables & adapter.

    Try flashing the GPU to the latest VBIOS from the support page.

    Ensure you’re using the...
  14. Replies
    5
    Views
    539

    use the tool in the stickied Raptorlake resource...

    use the tool in the stickied Raptorlake resource thread in this section. The firmware update can be done from DOS prompt or from within the OS
    *
  15. Can I ask what the reason is you need to update...

    Can I ask what the reason is you need to update for if you're not using a 13th gen CPU and don't require a microcode update?

    It's not uncommon in the slightest to lock out roll backs when there is...
  16. Yes, it will be obstructed. You would need to fit...

    Yes, it will be obstructed. You would need to fit a water block in order to utilise the second slot.
  17. Replies
    8
    Views
    403

    Hello, Can you confirm if the freezing...

    Hello,


    Can you confirm if the freezing occurs with the system at Optimised Defaults (No XMP)?

    5200MT/s is still an overclock. Use Karhu Ramtest to test stability.
  18. Replies
    9
    Views
    888

    Best bet is to contact your local retailer,...

    Best bet is to contact your local retailer, supply will depend on your region.
  19. Hello, Everything looks fine. There's no need...

    Hello,

    Everything looks fine. There's no need to change any associated memory voltages if the system is working, auto rules are working as intended. Depending on cooling, temperatures of 90c are...
  20. Replies
    5
    Views
    539

    Hello, If wanting to utilise the secondary...

    Hello,

    If wanting to utilise the secondary BIOS you will need to upgrade the ME driver and firmware.
  21. Replies
    169
    Views
    58,376

    Sticky: Z690 APEX 13700K @ 5.6 / 4.2 all core 1.33v ...

    Z690 APEX

    13700K @ 5.6 / 4.2 all core 1.33v

    uncore 4.5

    95959

    Samsung C36 6000 @ 6400 1T no tuning required. IMC much stronger on 13th gen
  22. Hello, install GPU Tweak III and disable Power...

    Hello, install GPU Tweak III and disable Power Detect. The LED being lit when the system is off is normal.
  23. Hello, TUF 4090 OC here. I've only run...

    Hello,

    TUF 4090 OC here.

    I've only run TimeSpy standard so far, however your score looks fine. See the averages (remember overall is also impacted by CPU score).


    95945
  24. Hello, See resource page here. You will need...

    Hello,

    See resource page here. You will need to ensure you have the correct ME Firmware and Driver

    https://rog.asus.com/forum/showthread.php?131027-RaptorLake-Resources
  25. It will have almost definitely been the route...

    It will have almost definitely been the route cause. The firmware and driver is essential for 13th Gen CPU.
Results 26 to 50 of 500
Page 2 of 20 1 2 3 4 5