Search:

I notice a version for the ax82u, could you do for the dsl-ax82u?
Thanks

Its not the browser, this is what I get in VPN now

92931

Yet in the older firmware I could control devices.

92932


for DNS Filter, now it's completely missing from the UI.

The lastest firmware v3.0.0.4.386_48378 for my dsl ax82u router has removed settings from my ui. I have lost vpn device control also dns device routing, google click links are not working,...

I have noticed this on other motherboards, plus if you set up in windows a new install usb, then reboot to install, no realtek sound will be found on install of windows 11, yet if you start the...

Picture I posted was not manual mode, as you should be able to tell, but the pre defined rule that you even have highlighted, if you selected it then you would see that playstation was not there yet...

Hi and just want to say thanks again for the support.

The Open nat, I did not try that rule in the older fw sorry.

It just seem to be that device will drop for a seconed or 2 then reconnect,...

New problem with dsl.90862
The dsl is not reconnecting nor is the system logs showing that the dsl is down.

Rgb is red untill dsl is connected then turns my colour, yet if dsl connection is lost it will stay my colour. But if the dsl go's down it use to go red on the older firmware, as it was one of the...

I will but this in to bits,
1. the RGB I set to blue, but when I first power on the router its red, if the DSL go's down it "USE" to go red. now it stays blue unless I power cycle then it will go...

Yes and after the dsl maintenance the router did not try to reconnect, which is strange. My other half should not of had to reboot. Also when dsl was down the router would glow red. Now it's not...

You say check the ip, the device had no ipv6 setting. So why the above happened im not sure.
So that ipv6 address was given by the router, yet ipv6 is off on the router.
My device is set to...

Yes it's my Weston digital my cloud storage system.
My partiner said the other day my net was down phone also, think they was doing maintenance on the dsl line. After 4-5 hr the phone was back but...

My log is now spamming with


Nov 25 01:41:23 miniupnpd[2748]: Failed to convert hostname 'fe80::290:a9ff:feda:cfc5' to ip address
Nov 25 01:41:23 miniupnpd[2748]: Failed to convert hostname...

Well if disabling adaptive QOS disabling IPV6, and when nameing devices you must not use a ' in the name, yet is allows in the UI. Yes it's is working a lot better now, my connection is a lot more...

Hi thanks again, I looked a port forward logs and all looks fine
90573
Yet the errors I see in the logs are for the vdsl connection I thinked.

And what is this quantum of class is big?

Could that be down to your open nat protocols like 2 xboxs using the same ports see picture.

90571


Should they be a port trigger If 2 devices use same?

Also I have UPNP enabled.

Everything seems fine yet get the above errors, I will send you some more feedback now, so you can check. Also I set the wps to switch led on/off and that was odd or slow to respond to clicks, did...

Hi thanks, yes I have seen the vpn errors, I normaly update the config file, but will forward to proton vpn too as I should not need to manual edit there file.

The above error is QOS! I get the...

I've had more of the above errors again today at 8am in the logs, i can post on request, also I am getting some other errors. I have sent a feedback report too. Only thing different I have done is...

@starrain@rog. Thank you for all the support.

Right, on wednesday I did a hard reset and then noticed the above error also i was getting a routing error for a ipv6 address yet ipv6 is off was...

Ok thanks, since I hard reset I have been getting a warning, I then soft reset and still get the below warning. Else everything seems fine


Nov 5 02:15:02 kernel: [59672.913794] ------------[...

Thanks but in the guide it says press power button, I have a switch, it mean when led gos off switch off then back on?

I would like to know the correct way to hard reset my AX82U.
Also a bit more info for the router ui reset.

To hard reset I read switch off the router hold the wps, till lights go out the push...

I'm not going to get the time to reflash the device, as it's not a quick process, I don't have 2-3hrs spare, so for now I'm just disabling the routers ipv6. I've found the routers working a lot...

In the protonvpn link there is a link at the bottom to test VPN, just before the pictures showing you how it should be. It says this website, as a link to
https://ipleak.net/