Search:

Type: Posts; User: Carlyle2020

Page 1 of 4 1 2 3 4

Search: Search took 0.00 seconds.

  1. Replies
    1
    Views
    90

    ? I had those fluctuations/droops with my x370...

    ? I had those fluctuations/droops with my x370 hero as well.

    All is good. Your board eats tight RAM timings like a champ and it is very forgiving during testing.

    ;-) I should know.

    Rgds...
  2. Replies
    11
    Views
    337

    IF it gets a little worse day by day, it could be...

    IF it gets a little worse day by day, it could be the PSU is on its way out.

    ...Maybe i assume this because it happened to me a month ago.

    So keep your assesment fluid please.

    Rgds
    Carlyle
  3. Replies
    23
    Views
    1,900

    Well it runs smooth with my 8700k and 8086k....

    Well it runs smooth with my 8700k and 8086k.
    Anyone having issues and has no 9900k?
  4. So you still have LN2 mode activated? ......

    So you still have LN2 mode activated?
    ... Doesn't one loose all waranty by activating it?
    Please turn it off.
    If you do not find a solution with LN2 mode turned off then you may already have...
  5. Hi Mappi75, i am a novice at subtiming ...

    Hi Mappi75,

    i am a novice at subtiming tweaking. So my tweak is rather basic. Lastly i want to point out that my motherboard is very forgiving concerning ram settings. So please try out at...
  6. Replies
    347
    Views
    67,708

    My 8086 runs fine. With and without power saving...

    My 8086 runs fine. With and without power saving settings.
    ... Isn't the "turbo" function diretcly below the speed step setting? *wink, wink*

    Regards
    Carlyle
  7. The PSU is absolute overkill for your system....

    The PSU is absolute overkill for your system.
    Overkill as in: You are running your system outside of the PSUs efficiency curve. You are wasting power on idle and on full load.
    !Matter it does not!...
  8. Far too early to tell. The Watchdog Error lets...

    Far too early to tell.
    The Watchdog Error lets me blelieve that you do not have faulty hardware. Rather some unfortunate Bios setting.

    So First steps:
    Check the AIO !
    IF the PSU has a self...
  9. Replies
    5
    Views
    253

    Well Sir, simply try it out. IF it does cut...

    Well Sir,

    simply try it out.
    IF it does cut the lanes simply sand down the DIMM.2 connections.

    Rgds
    Carlyle
  10. oh damn. I do not like how this forum double...

    oh damn. I do not like how this forum double posts if there is a hickup in the connection.
  11. Hi, first set your RAM manually using the...

    Hi,

    first set your RAM manually using the RAMS specs. Look at its package. The values to be set are on it. (Something like 17/19/39 or 17/19/19/39)
    Even set the RAM manually to 1.35 volt
    Don'...
  12. Correctly configured within Bios you will only...

    Correctly configured within Bios you will only loose Sata1-Port. Nothing else.
    The second evo will run on 4 pcie lanes from the z370 chipset.
    You will NOT LOOSE 16x GPU connectivitiy .

    Bios:...
  13. sry. double post.

    sry. double post.
  14. What was the vcore max after the stress test...

    What was the vcore max after the stress test please?

    You have cut it off right when the movie got interesting.

    And would you kindly check both boards at the CPU socket.
    Can you see any...
  15. ! Beware of the DIMM.2 SSD placement . It makes...

    ! Beware of the DIMM.2 SSD placement . It makes installing a NH-D15 with two fans tricky, but not impossible.
    Maybe you will take some APEX cover plasic off (which takes one screw more than one...
  16. Any Board in the Lineup can manage what you try...

    Any Board in the Lineup can manage what you try to archieve.

    IF you want to go waay beyond the specs you have mentioned there are two boards that stand out:
    The Maximus XI Extreme of course with...
  17. Thanks. Before going into specific settings: ...

    Thanks. Before going into specific settings:

    You mentioned having the same problem with the same settings with 2 different Bios versions...
    Go back to the time you first encountered the issue...
  18. 1.Is it normal for the voltage to drop from...

    1.Is it normal for the voltage to drop from 1.250V or 1.350V to 1.184V-1.200V under load while using LLC lvl 5 with adaptive voltage?

    The numbers presented do not add up. I will ignore them and...
  19. Kindly provide Bios pics of your config. ...

    Kindly provide Bios pics of your config.


    data data data !

    thx in advance

    rgds
    Carlyle
  20. Replies
    7
    Views
    696

    Some look like this: 81187

    Some look like this:
    81187
  21. Replies
    297
    Views
    83,041

    You are on page 30 of this thread. ...

    You are on page 30 of this thread.
    Statistically i would have to suggest: no.
    The board is awesome. Simply buy a soundcard. I did and i am happy to have kept my motherboard.
  22. Maybe try something like this: CPU Q-Fan...

    Maybe try something like this:

    CPU Q-Fan Control - PWM Mode
    CPU Fan Setup - 25 sec
    CPU Step down - 8.5 sec
    My :
    CPU FAN Lower Limit is 200 RPM
    Manual Fan Profile
    CPU upper Temp: 55
    max duty...
  23. Replies
    196
    Views
    44,000

    Oh it is better ! I just have cinebench R15...

    Oh it is better ! I just have cinebench R15 multi CPU scores to compare with.
    Those give me higher scores than all other Bioses since 1705.

    In my case i reach 1662 instead of 1650 with v.2004 ....
  24. Replies
    10
    Views
    3,879

    Hi there, would you mind posting a...

    Hi there,

    would you mind posting a screenshot of HWinfos sensors? It will be a pain. you might have cut and copy it together.
    It might help to determine where the bottleneck is.

    Start...
  25. jupp, and true 12 lanes are available to the...

    jupp,

    and true 12 lanes are available to the three M.2s, yes?
    So it is the best setup for your mentioned very high IO counts
Results 1 to 25 of 97
Page 1 of 4 1 2 3 4