Search:

Type: Posts; User: Rassal

Page 1 of 5 1 2 3 4

Search: Search took 0.02 seconds.

  1. Yes Nodens, i am booting on Windows Boot Manager....

    Yes Nodens, i am booting on Windows Boot Manager. It's my 1st boot device.
  2. Hi Nodens, I am in a similar problem, but i...

    Hi Nodens,

    I am in a similar problem, but i read and searched a lot in this topic, but my problems is similar... not that it bothers me much, but would like to have the RST or RSTe application...
  3. If anyone want to know where to can get the 12.6...

    If anyone want to know where to can get the 12.6 drivers, on the intel website i can only find the latest 12.5.0.1055 drivers, not the 12.6.

    But i found them here:
    ...
  4. Ok i managed to get 12 driver with 12 OROM 3602...

    Ok i managed to get 12 driver with 12 OROM 3602 bios... works fine, trim works. Not upgrading to 12.5.

    Is there a way to install the Intel Rapid Storage Technology software with this? I tried to...
  5. I am using 3602 with the 12.0 OROM and 11.7...

    I am using 3602 with the 12.0 OROM and 11.7 driver... is there any way to use the 12.x drivers with this?
  6. I can't tell about the right bios to support the...

    I can't tell about the right bios to support the 3970X, but i know you need at least one fan plugged in the CPU FAN of the motherboard for it to post.

    Why don't you use the wire fro, the h100i in...
  7. Replies
    4
    Views
    2,905

    It should work without problem if the cards says...

    It should work without problem if the cards says it can operate at PCIe 2.0 speed. If the card is backward compatible, it should. My guess is that an nVidia 680 should work on that board.
  8. Thread: RIVE Bios 3404

    by Rassal
    Replies
    178
    Views
    78,905

    Thx Nodens, I can give a real good positive...

    Thx Nodens,

    I can give a real good positive point to your modded bios... for anyone running the Corsair Link crappy software version 2.2.0, and wants to use RSTe 3.5.x they will get in a nightmare...
  9. XMP stands for eXtreme Memory Profile and it's a...

    XMP stands for eXtreme Memory Profile and it's a way to configure your bios with the required info to run your memory at top performance.
  10. ASUS policy for bent pins on CPU socket when doing RMA?

    Hi Everyone,

    Just wondering what's ASUS policy and physical damage to the CPU Socket with bent pins when doing an RMA. I understand that it's not Asus fault on bent pins, but when you do an RMA,...
  11. Thread: CPU Temp 125C

    by Rassal
    Replies
    22
    Views
    11,546

    Most reliable way to tell if your temp is ok is...

    Most reliable way to tell if your temp is ok is in the bios... all software have good or bad behaviors... so i guess you are. I use coretemp and i get almost same temp as i get in the bios.
  12. Thread: CPU Temp 125C

    by Rassal
    Replies
    22
    Views
    11,546

    What are you using to monitor TEMP?

    What are you using to monitor TEMP?
  13. Well, the board is working at 110% now... the...

    Well, the board is working at 110% now... the problem was:

    1- Dead motherboard battery... instead of 3v it was reading 0.065v... so i replaced it with a brand new one.
    2- I taught it was...
  14. Nodens, think you could check out if possible to...

    Nodens, think you could check out if possible to do on Rampage III Extreme?
  15. Really sounds like i nailed the problem... ...

    Really sounds like i nailed the problem...

    Incompatible ram... now running stable, no resets, no reboots... running windows 8 will all drivers installed... seems very stable... running prime95...
  16. Well, changed it with a 3.01v CR2032 battery......

    Well, changed it with a 3.01v CR2032 battery... tested it to 3.01v, so it's a good battery...

    I can see that time/date are not reset anymore... and that i don't lose bios settings...

    Now, i...
  17. Just replaced the battery, will report with...

    Just replaced the battery, will report with result... i am sure date/time reset and bios losing settings problem will be gone... i doubt about instability... but who knows!

    Thanks... i will...
  18. Ok, battery is indeed totaly dead... reads 0.63...

    Ok, battery is indeed totaly dead... reads 0.63 volts on my multimeter... replacing the battery as we speak...
  19. Yeah, but will a failed battery will cause all...

    Yeah, but will a failed battery will cause all sort of instability like i am getting with it? I can replace it no problem, it's a CR2032, pretty common battery.

    What if i replace the battery, and...
  20. Rampage III Extreme - Constant reboots, don't hold bios settings... unstable.

    Hi,

    I just got this board, friend of mine bought it to upgrade his system... it was used and professionally tested fully functional (yeah right!), was bought on Ebay and said it was a Repair, and...
  21. Got an update on the board today, i should get...

    Got an update on the board today, i should get the board friday. So with this in mind, and with Christmas around the corner, i should have the board installed in the system this coming weekend... so...
  22. No rush on this, as i don't expect to have the...

    No rush on this, as i don't expect to have the motherboard and system until 26th of december, then i have to upgrade everything (swap motherboards, install windows 8... etc... and then cable...
  23. I saw that on the Rampage III Extreme with x58 of...

    I saw that on the Rampage III Extreme with x58 of course, there is a bios modder that inserted the 11.6 ORom, says that X58 = no trim...

    The bios i found that has this is: ZioMod_1601_S06_SLIC
    ...
  24. Thanks, Will check this out when i get the...

    Thanks,

    Will check this out when i get the system and start to play with it.
  25. I wasn`t able in the past (over a year now) to...

    I wasn`t able in the past (over a year now) to overclock the ram... not even a tad... that`s why i had to clock it down at 1523 because at 190 it`s running at like 760mhz... as soon as i get over...
Results 1 to 25 of 110
Page 1 of 5 1 2 3 4