Search:

Type: Posts; User: chris635

Page 1 of 8 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    2
    Views
    2,878

    Looks like your using AI Suite? It does...

    Looks like your using AI Suite? It does that...your fine. Use different monitoring software and your concerns will alleviated.
  2. Hi, First off, that board is fine for the...

    Hi,

    First off, that board is fine for the high TDP. Are you running unmatched sets of ram together? Are you running in high performance mode or balanced mode? Also, are your cores parked or...
  3. How much ram, how many sticks are installed and...

    How much ram, how many sticks are installed and at what speed?
  4. Is this the stock settins? If not put everything...

    Is this the stock settins? If not put everything back to default settings then lets start from scratch.


    Edit: Are you on windows 10 or 7?
  5. Here ya go. ...

    Here ya go.

    http://rog.asus.com/forum/showthread.php?9339-Crosshair-V-NB-Temperature-Sensor

    I am not sure what the voltage ones are.
  6. This would be better than the H60....

    This would be better than the H60.
    http://www.newegg.com/Product/Product.aspx?Item=N82E16835608045&cm_re=noctua-_-35-608-045-_-Product

    Provided it will fit. That CPU needs big air cooling or a...
  7. I would also disable ECC (Error correction for...

    I would also disable ECC (Error correction for ram). This is for server applications. Why this is set to "enabled" by default is beyond me. You have to specifically buy error correction ram. With...
  8. Great to hear! Good luck.

    Great to hear! Good luck.
  9. Disable c6 state for the cpu, and ecc mode for...

    Disable c6 state for the cpu, and ecc mode for your memory in the bios. This should fix you up.
  10. Looks like 5a is internal cpu error.

    Looks like 5a is internal cpu error.
  11. If you dont have any fans connected to the cpu...

    If you dont have any fans connected to the cpu fan header it will not start unless you told the motherboard to ignore it. That's why I say connect the stock sink, and if that doesn't work then clear...
  12. Lets take the water cooler out of the equation...

    Lets take the water cooler out of the equation and check with stock heat sink first. If that doesn't work then clear the cmos. Either by pushing cmos button on the motherboard and if that doesn't...
  13. Try putting the stock heat sink on the cpu. Just...

    Try putting the stock heat sink on the cpu. Just to rule out h100i problems. By the way, are your fans for the h100i connected to the motherboard?
  14. How long have you had that h100i and were you...

    How long have you had that h100i and were you overclocked?
  15. How much voltage were you running?

    How much voltage were you running?
  16. Keep in mind that I am overclocking using the...

    Keep in mind that I am overclocking using the front side bus, it's at 305 for 5016mhz (1.63v..for the 8350)on the cpu, 2737 mzh on the cpu/nb (1.42v) and 2737 mhz on the ht speed, and just over 2400...
  17. I can go by my battery back up indications (may...

    I can go by my battery back up indications (may not be 100% accurate). Under full load with crysis3 running maxed out. I am pulling just over 700 watts from through the battery. Normal usage with CnQ...
  18. On my rig @ 5ghz c6 wil freeze randomly so its...

    On my rig @ 5ghz c6 wil freeze randomly so its disabled. ECC is also a problem. You seem to have had the same issues as I did in the past. Disabling both of these worked for me as well. I do have CnQ...
  19. Replies
    27
    Views
    10,441

    Yes. Faster latency response. Looks like it's a...

    Yes. Faster latency response. Looks like it's a good set.
  20. Replies
    27
    Views
    10,441

    I did see why it wouldn't. My Tridents have...

    I did see why it wouldn't. My Tridents have slightly higher timings. This is what I run daily.

    48797
  21. Replies
    28
    Views
    23,786

    Properly setting up high speed ram definitely...

    Properly setting up high speed ram definitely takes time for a good set up. This is my 24/7 setting.

    48670

    48671

    Silicon lottery is a player even for the IMC of the CPU. Voltages are high...
  22. Replies
    27
    Views
    10,441

    Yes, I believe stock setting for cpu/nb is 2200...

    Yes, I believe stock setting for cpu/nb is 2200 mhz and ht link 2600 mhz.
  23. Replies
    27
    Views
    10,441

    It's not that you cant, if you already know the...

    It's not that you cant, if you already know the capabilities of your board, ram and CPU. D.O.C.P (XMP profiles are actually intel profiles not AMD) are auto rules (for AMD) ASUS set up for your...
  24. Replies
    27
    Views
    10,441

    If windows is not installed then you don't want...

    If windows is not installed then you don't want to overclock anything yet. Do not enable XMP profile until after windows is installed.
  25. Replies
    27
    Views
    10,441

    First, disable ecc mode. Lets see if this helps....

    First, disable ecc mode. Lets see if this helps. Normally I don't use turbo, I manually clock up everything, but like I said, lets disable ecc mode first. It always helps with stability on these...
Results 1 to 25 of 180
Page 1 of 8 1 2 3 4