Search:

Type: Posts; User: Grimpak

Page 1 of 3 1 2 3

Search: Search took 1.33 seconds.

  1. what does the event monitor says? it might not be...

    what does the event monitor says? it might not be a motherboard issue.
  2. second x16 slot might be x16 physical, but it's...

    second x16 slot might be x16 physical, but it's x8 electrically.

    keep the fw card on the bottom slot, it's chipset bound, and as long as it's on default mode (x2), only SATA ports 3 and 4 are...
  3. Replies
    14
    Views
    1,826

    I don't think it's a fw update but actually...

    I don't think it's a fw update but actually allowing a tool to update the thunderboltEX 4 card fw.
  4. it's probably due to the pci-e switches. can't...

    it's probably due to the pci-e switches. can't change that.


    as an alternative... maybe a pcie x1 riser cable?
  5. First of all, that slot doesn't have 16 lanes,...

    First of all, that slot doesn't have 16 lanes, only 4. It might be, phisically, a 16x slot, but it's only 4x electrically (check out the metal tabs inside the slot and see that they don't go all the...
  6. the pcie slot works fine (albeit at 3.0 speeds)....

    the pcie slot works fine (albeit at 3.0 speeds). it's the first nvme slot that doesn't work with 10th gen.
  7. use vcore offset to drop the voltage.

    use vcore offset to drop the voltage.
  8. Replies
    16
    Views
    2,881

    question, if you don't mind: why?

    question, if you don't mind: why?
  9. M13A user here. maybe it's the fact that...

    M13A user here. maybe it's the fact that sometimes when doing auto-tuning, some fans end up with ridiculous minimum low-speed values, like 60%.


    either way, reporting that I managed to shave some...
  10. that must be the problem. check voltage caps...

    that must be the problem. check voltage caps menu, digi+ menu, etc... also, ram says it's running at 2800mhz.
  11. Replies
    68
    Views
    13,325

    did you update to the latest firmware? in my case...

    did you update to the latest firmware? in my case it seems that it has solved it.
  12. I have an 11900f in an M13 apex (I know, totally...

    I have an 11900f in an M13 apex (I know, totally overkill for the cpu) and running a ballistix 32gb kit at 3600mhz happy as a bunny.

    So at this point I can only think of 3 things:

    A) board has...
  13. try to setup it manually instead of going XMP.

    try to setup it manually instead of going XMP.
  14. use xmp mode 1 instead 2. maybe you'll need to...

    use xmp mode 1 instead 2. maybe you'll need to pump up some voltages too. try to put vdram at 1.375 or something thereabouts (don't worry much here about voltage, ram can handle up to 1.4v well.
    ...
  15. Hmm... I think the reason is because you're...

    Hmm... I think the reason is because you're trying to run 4 dual rank sticks of high density. 11th and below only works well with 2 ranks per channel. Those sticks are dual rank so, you're putting...
  16. Replies
    8
    Views
    1,127

    tried fiddling on the BIOS usb options?

    tried fiddling on the BIOS usb options?
  17. what case do you have?

    what case do you have?
  18. Replies
    7
    Views
    612

    you're going to use the 10700k? any particular...

    you're going to use the 10700k? any particular reason, or do you have it lying around?


    either way, don't forget that the cpu-bound nvme slot won't work with 10th gen (the m.2_1 slot)
  19. go to the drivers, raise power limit? or use ...

    go to the drivers, raise power limit? or use afterburner to raise power limit?
  20. you can supertune it (fiddle with the primary and...

    you can supertune it (fiddle with the primary and secondary timings). However that is a very time-consuming effort, I must tell you. Considering zen2 specs, there is benefit to bring the memory up...
  21. Okay, fair, but I think you can transfer the ...

    Okay, fair, but I think you can transfer the keys to/from a usb stick with fTPM, if i'm not mistaken.
  22. you have win11 beta version installed, I think...

    you have win11 beta version installed, I think that's your problem. probably some sort of driver issue.
  23. Replies
    9
    Views
    7,190

    well, he has a 10850k, so any change will be at...

    well, he has a 10850k, so any change will be at most a sidegrade, at worst a downgrade.
  24. Replies
    8
    Views
    894

    Hmm, memory conflict then. Guess the issue was...

    Hmm, memory conflict then. Guess the issue was all software.
  25. Ok but do you have any *real* need for the TPM...

    Ok but do you have any *real* need for the TPM module? as far as I know, either the module or the fTPM are functionally equal.
    Feel free to correct me on this tho, for I'm not sure.
Results 1 to 25 of 68
Page 1 of 3 1 2 3