Search:

Type: Posts; User: Arne Saknussemm

Page 1 of 20 1 2 3 4

Search: Search took 0.10 seconds.

  1. I cant remember exactly...but its called "global...

    I cant remember exactly...but its called "global c states" and its in one of the "common options" parts of bios advanced tab....
  2. How did you update? In any case...I would...

    How did you update?

    In any case...I would reflash the BIOS...BIOS flashback method.obviously with a fresh download of the latest version.
  3. At defaults at that kind of normal room temp the...

    At defaults at that kind of normal room temp the temp should be a stable 30 degrees or close at desktop idle.

    Always worth checking cooler is mounted well
  4. 35 seems a touch too hot to me...but depends on...

    35 seems a touch too hot to me...but depends on ambient...what is room temp?
  5. Replies
    5
    Views
    279

    5.1 at 1.35 is pretty typical...good cooling and...

    5.1 at 1.35 is pretty typical...good cooling and a bit of luck will get 5.2...maybe up to 1.38v...

    Lottery win will get 5.3

    The thermals are better than K...

    Turn off hyperthreading if you...
  6. Replies
    3
    Views
    78

    Have you tried a different PSU? I'd also...

    Have you tried a different PSU?

    I'd also reflash BIOS...BIOS flashback method...and check motherboard battery
  7. For Haswell E I'd try the last of the 2XXX BIOSes

    For Haswell E I'd try the last of the 2XXX BIOSes
  8. You can try to set DOCP profile in BIOS.. ...

    You can try to set DOCP profile in BIOS..

    However 3600 is pushing it for a lot of ryzen memory controlers so you may need to tweak dram voltage and/or soc voltage.

    Or try 3200 and tighten...
  9. If you want to see timings in OS use...

    If you want to see timings in OS use memtweakit...or ASRock do a similar program...
  10. Thread: Ram

    by Arne Saknussemm
    Replies
    13
    Views
    338

    OK...let me know how it goes...for sure you want...

    OK...let me know how it goes...for sure you want to try everything....these boards aren't cheap!
  11. I'd check the GSkill RAM configirator for the MB...

    I'd check the GSkill RAM configirator for the MB
    ...
  12. Depends.... Look up interleaving.. Also T...

    Depends....

    Look up interleaving..

    Also T topology boards will run 4 sticks better often...
  13. You will need the antenna...and a driver I presume

    You will need the antenna...and a driver I presume
  14. I would go for the Maximus XI Extreme as the...

    I would go for the Maximus XI Extreme as the premium build option for the 9900KS....top of the line...as you are used to that level of features...quality etc.
  15. The ideal is to always have more memory available...

    The ideal is to always have more memory available than is being used by your applications...so I'm happy to say that looks OK...you don't want to be in a situation where you are pushing the limits of...
  16. Thread: Ram

    by Arne Saknussemm
    Replies
    13
    Views
    338

    It's worth a try...more than once I've seen kits...

    It's worth a try...more than once I've seen kits that dont work at stock default settings...but do fine when XMP is set...or setup manually to rated frequency and voltage...
  17. Thread: Ram

    by Arne Saknussemm
    Replies
    13
    Views
    338

    Yeah...you have to be methodical to eliminate...

    Yeah...you have to be methodical to eliminate possibilities...

    Try the other board...if behaviour is the same it's more likely tje CPU...

    When you set up in recommended slots...are you applying...
  18. 9900KS is lga 1551...the omega is lga2066 Make...

    9900KS is lga 1551...the omega is lga2066

    Make sure you select parts that go together....check QVL of MB you choose for RAM etc.
  19. Thread: Ram

    by Arne Saknussemm
    Replies
    13
    Views
    338

    You said you swapped MB right...same problem...

    You said you swapped MB right...same problem persists?

    That makes me think CPU memory controller might be a problem or CPU socket contact is bad...
  20. Replies
    6
    Views
    128

    Maybe disconnect all power from the...

    Maybe disconnect all power from the board...battery too...then reseat CPU...clean RAM slots etc.

    Nice to hear someone benching Spi
  21. Thread: Ram

    by Arne Saknussemm
    Replies
    13
    Views
    338

    Same CPU on those boards? Have you tried a bit...

    Same CPU on those boards?

    Have you tried a bit more voltage for dram and vccsa...what is the board applying at stock and at xmp?

    The kit in my specs worked great on that board and with my...
  22. Check out a site called Puget Systems...they do...

    Check out a site called Puget Systems...they do extensive reviews of systems and running different video software...you might get a clue for your particular use case...

    Often less cores at higher...
  23. Replies
    6
    Views
    128

    Have you got a different PSU to test...and have...

    Have you got a different PSU to test...and have you disconnected everything to bare bones for troubleshooting...

    The steps you list do point to the MB so far
  24. All core OCs are generally lower than single core...

    All core OCs are generally lower than single core boost clocks.
    Expect 4.1...4.2GHz and you wont be disappointed.

    You will want excellent cooling for sustained loads at those speeds on so many...
  25. Sweet! Common misconception the boot...

    Sweet!

    Common misconception the boot time...will not change...loading times for everything else will!
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4