Search:

Type: Posts; User: mindsignals

Page 1 of 3 1 2 3

Search: Search took 0.00 seconds.

  1. I went with the NH-D15S. Thanks!

    I went with the NH-D15S. Thanks!
  2. Can you link which one you use specifically,...

    Can you link which one you use specifically, please? I'm looking at either this or the Noctua. I have a Noctua in my other rig which does alright, but I'd like one that is better. Someone had given...
  3. The noctua setup is what I have right...

    The noctua setup is what I have right now...running at 4.2 GHz but with those really high temps at full 24/7 utilization.
  4. Oh, I should add that temps are hitting 80 while...

    Oh, I should add that temps are hitting 80 while running it hard on all cores at 100% utilization 24/7. CPU mining (and GPU mining or gameplay).
  5. I should add that my CPU exhaust fan slot is...

    I should add that my CPU exhaust fan slot is occupied by a 1080ti closed loop water-cooled fan. So not sure how that would factor in since that must remain.
  6. CPU Cooler recommendation for Rampage V Extreme

    Probably air-cooled else closed-loop water-cooled...please recommend for each or both...something maintenance-free.

    Two machines, one is Rampage V Extreme, the other is a competitor. The Rampage V...
  7. Replies
    11
    Views
    1,147

    Nope, I can try that...I didn't realize we should...

    Nope, I can try that...I didn't realize we should use that profile, but then change the strap back. I'll give that a try. VCCSA was only being set to about 0.88. I have it at around 0.91 now...at...
  8. Replies
    11
    Views
    1,147

    I haven't been able to get it to boot in XMP as...

    I haven't been able to get it to boot in XMP as that sets the 125 cpu strap. I've had no sucess yet with that profile.
  9. Replies
    11
    Views
    1,147

    I purchased the Corsair Vengeance RGB DDR4 4 x...

    I purchased the Corsair Vengeance RGB DDR4 4 x 16GB 3000MHz memory. I have the o/c set to 3000 on manual with 100 cpu strap (I couldn't get 125 booting), but under cpu-z, it indicates memory speed of...
  10. Replies
    11
    Views
    1,147

    4 x 16GB memory recommendation

    I am upgrading my memory for a 5960x on the Rampage V Extreme and moving the old Ripjaws 4 x 8 GB DDR4-2666 memory to a different motherboard from another manufacturer (AsRock OC).

    Looking for...
  11. Replies
    6
    Views
    442

    Thanks everyone!

    Thanks everyone!
  12. Replies
    6
    Views
    442

    So it sounds like the best bet is to get a fresh...

    So it sounds like the best bet is to get a fresh 64 GB in 4 sticks and move the 32 GB sticks to another x99 rig I'm getting together then, correct?

    The issue I'm running into is that the algorithm...
  13. Replies
    6
    Views
    442

    Mixing memory per side of CPU

    Can you mix memory speeds/types on each of the two sets of 4 sticks? For example, one side has 4 x 8 Ripjaws DDR4 2666 15-15-15-2T that I got right after this motherboard first came out. I want to...
  14. Replies
    21
    Views
    7,683

    OC help

    I got inspired by this thread and have been trying to optimize mine all day...looking for tips. I'm air-cooled and actually need to swap out to a different fan that I already have. I got the CPU to...
  15. CPU Fans at bootup - what is normal behavior

    We had to replace my Rampage V Extreme x99 motherboard after the original one died. Upon boot-up, both CPU fans spin momentarily, but then stop. Is this the normal behavior or should they continue...
  16. Replies
    2
    Views
    611

    Thank you.

    Thank you.
  17. Replies
    2
    Views
    611

    Fried? Help!

    Our fuse tripped earlier. I have a gaming system also used as a mining rig with 5 x 1080ti cards. After the fuse tripped (which does occur every few weeks), the mobo lights are lit, but it will not...
  18. I did try to test the CPU yesterday with Intel's...

    I did try to test the CPU yesterday with Intel's Diagnostic Tool. Unfortunately, that crashes on launch so it looks like I'll need to make a bootable stick if I'm to run that. (It gives the...
  19. What 32GB memory kit worked for you best out of the box? Preferably DDR4-3200.

    I have fought with my GSkill 2666 for years on my 5930k (32GB G.Skill Ripjaws 4 Series 2666MHz (4X8G GSKILL F4-2666C15Q-32GRR)) and have finally decided I am getting new memory after 2 1/2 years of...
  20. PG278Q x 3 with GTX 1080/1070 2-way SLI and HB SLI adapter in lieu of 3 x 780ti?

    Is anyone running three PG278Q with a pair of 1080 (or 1070) NVidia cards in dual-SLI with the new HB (high bandwidth) adapter for Surround in 7680 x 1440?

    I have been using 3 x 780ti but the heat...
  21. Replies
    27
    Views
    43,277

    Mine still doesn't work either. :(

    Mine still doesn't work either. :(
  22. Replies
    7
    Views
    2,367

    Most recently, it was an Ad, but I haven't looked...

    Most recently, it was an Ad, but I haven't looked lately as I'm so used to it occurring regularly. I just tried several tweaks from @Pleot for eventual voltage on the dram timings to see if that...
  23. Replies
    27
    Views
    43,277

    Does DTS Interactive 5.1 for gaming still not...

    Does DTS Interactive 5.1 for gaming still not work for everyone on Win 10? As a prior poster said, streaming an mkv works fine over optical for DTS, but the DTS Interactive 5.1 for gaming remains...
  24. @Pleot said, "If you set eventual voltage on the...

    @Pleot said, "If you set eventual voltage on the dram timings section of BIOS, it will be the value the machine uses as dram voltages. If eventual is set, the dram voltage values will be only used to...
  25. Replies
    7
    Views
    2,367

    Issues are worse in surround, but still very bad....

    Issues are worse in surround, but still very bad. And it actually improved significantly under Windows 10 (from almost unbearable to horrible). For example, when booting, I have to reset the cmos...
Results 1 to 25 of 60
Page 1 of 3 1 2 3