Search:

Type: Posts; User: bscool

Page 1 of 6 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    8
    Views
    181

    I take you have it in a case and side panel on....

    I take you have it in a case and side panel on. Otherwise you can set FlexKey option in bios under tools to boot to bios/safeboot when presssed.

    I dont have a z690 ddr5 board just going by memory...
  2. So go back to an older bios. I have tested them...

    So go back to an older bios. I have tested them all and they are about the same for me but I set all timings manually.

    If an older bios performed better why not use it?

    Did you try bios 1001?...
  3. I had to set static v core 1.36v in bios to run...

    I had to set static v core 1.36v in bios to run 52 all core or to boost 54 to 55 on multiple cores.

    Cant complain though with 4133c15 DR b die.

    If I run the CPU at default clocks or MCE auto...
  4. z370 was first released in 2017 so yeah it...

    z370 was first released in 2017 so yeah it considered older. Going on 4+ years. When you bought it in 2019 it was already a generation old and the z390 was out.

    You might get 128gb working but at...
  5. I have never tried but just knowing what i know...

    I have never tried but just knowing what i know from 390 2x16 and 4x16. I would be suprised if 370 can run 4x32. Even 2x32 isnt on the gskill compatibilty list. Maybe it works but that is a lot of...
  6. Replies
    1
    Views
    161

    I leave them on auto or default. I wouldnt...

    I leave them on auto or default.

    I wouldnt change them unlesss you have an issue and you have a reason.
  7. Replies
    23
    Views
    2,015

    I have a spare ssd that had a clean install of...

    I have a spare ssd that had a clean install of Win11 on it. I installed the latest driver and then I heard it when the drivers initialize. Three pump sounds, it not loud. I had to really listen to...
  8. Ok I thought maybe it was single rank b die. I...

    Ok I thought maybe it was single rank b die. I have no experience with Crucial and dont remember seeing any feedback on it.
  9. The settings we were tesing had no cpu oc and...

    The settings we were tesing had no cpu oc and mem was 400014-15-15. He was stable with the same setting on 707 so he went back to that 707 and then went to 51 p core and 40 e core all core and said...
  10. Replies
    23
    Views
    2,015

    You are on the Strix A d4? I dont see a bios 1901...

    You are on the Strix A d4? I dont see a bios 1901 and I have never had 3 booms on start up. I am on bios 901 and never noticed an issue with pops on any bios version and I have tried them all.

    I...
  11. What memory are you running? For me in a little...

    What memory are you running? For me in a little testing 707 is best for stability with a2 pcb sr b die.

    I could also use 901 with sr but i had a friend i was helping and usng the same settings as...
  12. z690 Strix A d4 bios 901 4133c15-15-15 2x16 DR...

    z690 Strix A d4 bios 901

    4133c15-15-15 2x16 DR b die

    1.55v dram

    sa/dq 1.35(auto)
    91372
    91373
  13. And pretty much every new generation has some...

    And pretty much every new generation has some issues the first couple months. I remember it with z390, z490, z590 etc.
  14. Which mb? MSI was daisy chain on z390. Asus was t...

    Which mb? MSI was daisy chain on z390. Asus was t topology. But it doesn't matter, if yours old mb works for you and z690 doesn't.
  15. z390 was most likely t topology and does better...

    z390 was most likely t topology and does better with 4 sticks. Daisy does better with 2 sticks and you usually loose a couple mhz or more when not following MB topology. z690 Strix I can run...
  16. https://www.overclock.net/threads/official-asus-st...

    https://www.overclock.net/threads/official-asus-strix-maximus-z690-owners-thread.1794802/post-28916500

    901 and 707 Seem oc for me on 2x8. Not sure how they are on 4x8. Havent test 2x16 b die yet...
  17. Best bet would be 2x32. I trust gskill ram config...

    Best bet would be 2x32. I trust gskill ram config and it shows 3200 and 3600 working for 2x32. they also have 4000+ but then you are in gear 2 and it usually better to run gear 1 for lower latency....
  18. What bios are you on? I updated to the latest 812...

    What bios are you on? I updated to the latest 812 bios for the Strix A d4 and havent had any issues.

    812 https://www.dropbox.com/s/t1m4s5mzc6...-0812.rar?dl=0

    source...
  19. For me it is the best bios by far, allows for...

    For me it is the best bios by far, allows for much lower sa/vddq with dual rank b die. i didnt test the others on 4 sticks so I have no idea how they do.

    812...
  20. z690 Strix A d4 bios 812 2x16 b die 4133c15 ...

    z690 Strix A d4 bios 812
    2x16 b die 4133c15

    9112291123
  21. Strix z690 A d4 bios 812 Testing 4x16 3600c14...

    Strix z690 A d4 bios 812

    Testing 4x16 3600c14

    I didnt do a long memory test as if no one is interested I am not going to spend the time. CMO should work for 4x8 also. You could bump up speed...
  22. Sticky: Edit

    Edit
  23. I didnt know you where trying to run 4x16. It is...

    I didnt know you where trying to run 4x16. It is not on the QVL or Gskill mem compatibily list for the MB so no suprise with doesnt work with XMP.

    Looking at Gskill site they show 4x16 as...
  24. I dont think it is the bios. There is something...

    I dont think it is the bios. There is something else going on. CPU or MB. I saw on overclocker.net a couple people get defective cpus and mbs that wouldnt run XMP.

    Many are running single and...
  25. Might need sa and vddq set manually. You will...

    Might need sa and vddq set manually. You will need to expriment but I would try from 1.25 to 1.35 for sa and vddq same. VDDQ might need to be slightly higher like sa 1.3 and vddq 1.35.

    I saw...
Results 1 to 25 of 148
Page 1 of 6 1 2 3 4