Search:

Type: Posts; User: OohDreamWeaver

Search: Search took 0.00 seconds.

  1. Reapplied thermal paste and temps are back to how...

    Reapplied thermal paste and temps are back to how they were prior to re-arranging the cooler. So I need to change the settings you just mentioned, then change DRAM Voltage to 1.5v (the numbers turn...
  2. DRAM 3000 at 1.5v, timing listed on the stick was...

    DRAM 3000 at 1.5v, timing listed on the stick was 16-17-17-36 1.2v didnt see any timings on the box though but it is from 2016 or 2017, so the 2t 2n etc etc i dont see that on the stick either. Also...
  3. hate to be bothersome, been awhile with no...

    hate to be bothersome, been awhile with no replies. Is there anything else in the bios I can do or try to get more out of this cpu / gpu / ram set-up? I was just going to upgrade ram to see, but ive...
  4. I was able to get 5ghz at 1.39 to load windows,...

    I was able to get 5ghz at 1.39 to load windows, passed 15min stress test on realbench, I followed your instructions for using paint but when I try to upload it says " asus rog says invalid file" its...
  5. Wasn't able to quite figure out the multiple...

    Wasn't able to quite figure out the multiple screenshots and placing them into paint

    I was able to bump the CPU Core Ratio Limit to 49 and 1.3v and its stable, other than the iffy ram which in...
  6. When I delidded I replaced old paste with the...

    When I delidded I replaced old paste with the noctua n1? That came with the cpu cooler. Running cyberpunk medium ray tracing and highest temp after 2 hours of play was 72 and that's with watching a...
  7. So I delidded, replaced thermal paste, added new...

    So I delidded, replaced thermal paste, added new cooler nh-d15 with 2 fans, upgraded intake fans from 120mm to 140mm, did a small overclock that I found on a forum here
    1) Reset the bios to...
  8. Overclocking Intel i7700k with Asus z270e or Upgrade?

    Im just needing some help with the decision of either overclocking with more cooling or scratching it and upgrading. I built this around September of 2017 but have never messed with overclocking out...
Results 1 to 8 of 10