Search:

Type: Posts; User: runningdodo

Search: Search took 0.00 seconds.

  1. No effect, sorry.

    No effect, sorry.
  2. I got the same issue. No way to get it...

    I got the same issue.

    No way to get it working. :(
  3. 9900K OC seems to work quite fine without...

    9900K OC seems to work quite fine without problematic issues. :)

    78036

    Source:...
  4. Replies
    80
    Views
    14,454

    Nothing new for the Maximus X Formula... .

    Nothing new for the Maximus X Formula... .
  5. Thanks, you are right. If I set it to enabled,...

    Thanks, you are right.

    If I set it to enabled, the little problem is gone. :)
  6. No, there isnīt any difference in thermal...

    No, there isnīt any difference in thermal behavior between 8700K and 8086K because they have the same TIM under their heatspreaders.
  7. Maximus X Formula and Core Temp Power reading

    With my new system (Asus Maximus X Formula+Core i7 8700K) I installed Coretemp because I use it since many years.

    The problem is, that Power information is incorrect. No matter how hard the CPU is...
  8. Questions about the QvL list supported RAM and SSDs

    In The QvL List to my Maximus X Formula (and that is similar to X Hero Boards)


    there are only 4*16 GB RAM Kits but no 2*16 GB Kits at all? Why?



    there are only Samsung 960 evo...
  9. Yeah, water cooling ftw! :D

    Yeah, water cooling ftw! :D
  10. Iīm shure, that this behavior isnīt the...

    Iīm shure, that this behavior isnīt the mainboardīs falut.

    Perhaps youīve just forgotten to remove the protection foil of the coolerplate or you made a mistake with mounting ist.
  11. 1.) It only reaches 5 GHz boost clock on one...

    1.) It only reaches 5 GHz boost clock on one core.

    2.) The 8086K are binned 8700K CPUs. The best 8700K are as good when oced as the best 8086K, the can reach 5,2-5,3 GHz@1,35V Vcore primestable...
  12. No it isnīt. Same lousy TIM under itīs...

    No it isnīt.
    Same lousy TIM under itīs heatspreader.
  13. Delidding with changing from original TIM...

    Delidding with changing from original TIM (thermal paste) to liquid metal will bring greater reduction of your CPU-Temp than changing the cooler.

    You then could easily keep your H100I v2 if you...
  14. Replies
    23
    Views
    3,991

    Nice run, congrats! :) How high is VRM-Temp...

    Nice run, congrats! :)

    How high is VRM-Temp going up under full load with prime@1,44 V Vcore?
  15. Replies
    76
    Views
    10,412

    Thatīs my question too. The only mainboard ,...

    Thatīs my question too.

    The only mainboard , witch gets the 1503 BIOS via HP, ist as far as I can see the Hero.

    I think, Iīm better a bit too careful with non-official BIOSes, so I hesitate...
  16. Good news! Thatīs a new feature, a new...

    Good news!
    Thatīs a new feature, a new possibility witch makes updating BIOS much more comfortable than it used to be previosly. :o
  17. Replies
    76
    Views
    10,412

    And what about the new BIOSes for the other...

    And what about the new BIOSes for the other Maximus X boards beside the Hero?
  18. For me, itīs the same siutuation with a Maximus X...

    For me, itīs the same siutuation with a Maximus X Formula.

    Iīve got two 16 GB Modules of F4-3600C17D-32GTZR and XMP wonīt work. Not even with Vccsa of 1,20 V and Vccio of 1,168 V.
    Overvolting...
  19. How much VCCSA and VCCIO did you have to apply to...

    How much VCCSA and VCCIO did you have to apply to get the RAM stable?
  20. Saving and reapplying BIOS settings befor/after BIOS Update

    Since I am a satisfied owner of a Maximus X Formula Mobo, I updated my BIOS twice, now using the 1003 version.
    As recommended, I loaded the optimized defaults before and after the update process....
Results 1 to 20 of 20