Search:

Type: Posts; User: Powerfull

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Replies
    17
    Views
    1,898

    Why not using GRC InSpectre application to...

    Why not using GRC InSpectre application to disable the protections and get the speed back?
  2. Replies
    6
    Views
    1,004

    I had a similar issue and I found a solution. ...

    I had a similar issue and I found a solution.

    I own a Samsung 950 PRO, 960 PRO and 970 PRO. For unknown reason only the 970 PRO was not visible when using an Operating System by booting in...
  3. Have a look here for the latest microcode:...

    Have a look here for the latest microcode:
    https://downloadcenter.intel.com/download/27591/Linux-Processor-Microcode-Data-File?v=t

    Here is the current updated document from Intel:...
  4. Replies
    692
    Views
    259,373

    I usually open new BIOS with UBU to check CPU...

    I usually open new BIOS with UBU to check CPU microcode and OROM versions, there is no need to install it if UBU can read it.
  5. Replies
    692
    Views
    259,373

    Thank you for this 3801 updated bios (Haswell-E...

    Thank you for this 3801 updated bios (Haswell-E only) with 3C cpu microcode.
  6. Replies
    692
    Views
    259,373

    Hello, Would you mind sharing your 3801 modded...

    Hello,

    Would you mind sharing your 3801 modded bios for the Rampage V Extreme?

    Thanks
  7. Thank you TeddyRaspin.

    Thank you TeddyRaspin.
  8. I understand that microcode 3B is not fully...

    I understand that microcode 3B is not fully stable and we have to wait for an updated microcode from Intel, in the mean time can you post bios 2101 with 3A which is latest stable microcode.
    Thank...
  9. Do you mind posting the 2101 with 3B and 3A...

    Do you mind posting the 2101 with 3B and 3A microcode?
    The official 2101 has a old microcode 2D.

    Thank you.
  10. Thread: Dual Raid0?

    by Powerfull
    Replies
    2
    Views
    1,406

    You can run 2 raid0 on the intel ports, I have...

    You can run 2 raid0 on the intel ports, I have done it in the past: 4HDD raid0 + 2 SSD raid0 using SATA 1, 2, 3, 4 and SATA 5, 6 check the manual for their exact location.
  11. Windows 10 To Go USB will have also no problem to...

    Windows 10 To Go USB will have also no problem to see the M.2 or any other RAID devices and you can install Acronis or any other backup tools.
  12. Replies
    20
    Views
    19,482

    What is the worst continuous test I can run to...

    What is the worst continuous test I can run to see if my 950PRO is too hot during load?

    In idle I have 30C with 20C ambient with no modification. Heatinks are not really an option here as it is...
  13. Replies
    1
    Views
    1,192

    To back you up, I also have a positive experience...

    To back you up, I also have a positive experience with 64GB using 2 cheap Crucial 2133MHz/CAS15 4x8GB Kits running at 2400MHz 11/11/11/27/CR2

    Aida throughputs are between 65-70MB/s and it is...
  14. Replies
    3
    Views
    6,224

    The only way to disabled it without removing it...

    The only way to disabled it without removing it is to plug a X8 device in the PCIE_X8_4 slot when using a 40-LANE CPU.

    I would love to have the option to disable it in the UEFI.
  15. Sticky: I tried and this has no effect on on the M.2...

    I tried and this has no effect on on the M.2 slot.

    I guess the only way to disabled the M.2 solt is to plug a PCIe X8 card in the PCIEx8_4 slot and leave the PCIEx8_4 and M.2 Configuration to...
  16. Sticky: I will try and report back. Thanks

    I will try and report back. Thanks
  17. Sticky: Under Onboard Devices Configuration > PCIEx8 and...

    Under Onboard Devices Configuration > PCIEx8 and M.2 Configuration
    I only have the option to set it to "Auto" or "M.2", I do not have an option to disable it.

    May be it can be disable via the...
  18. Sticky: Anyone knows how to disable the M.2 drive without...

    Anyone knows how to disable the M.2 drive without removing it?

    Thanks
  19. Sticky: I finally received the Samsung 950 PRO, I managed...

    I finally received the Samsung 950 PRO, I managed to move the M.2 motherboard stand-off to the correct position, slide the SSD under the 3 watercooled GPU and screw the SSD.
    That was not easy at all...
  20. Replies
    17
    Views
    4,646

    Power cut can corrupt the RAID array. If you...

    Power cut can corrupt the RAID array.
    If you still got a "non-RAID" drive you can try this guide, assuming the drive is still working:...
  21. Sticky: Thanks for the tips, I will post back,how I did...

    Thanks for the tips, I will post back,how I did it, once I receive my M.2 drive.
  22. Sticky: Thank you, this was the answer I was looking for....

    Thank you, this was the answer I was looking for.
    I am not using hard tubing, but I never tried to remove the 3 GPUs together while still connected with the waterblock bridge. Any advice to do that...
  23. Sticky: Thank you for the link, but I did not find my...

    Thank you for the link, but I did not find my answer, it shows mechanical conflict between the hyperkit module and the graphic card.

    In my case I have 3 GPUs with waterblock and I would like to...
  24. Sticky: Hello, sorry if this was already answered, but it...

    Hello, sorry if this was already answered, but it possible to fit a M.2 drive without removing the GPUs which are in Trifire?
    The GPUs are R9 290 and go over the M.2 slot.
  25. Hi Minacious, I am running also 64GB using two...

    Hi Minacious,

    I am running also 64GB using two (4x8GB) 32GB kits (I know it is not recommended) rated at 2133MHz@CAS15 which I run at 2400MHz@CAS12.

    Use all the advices that were given above...
Results 1 to 25 of 31
Page 1 of 2 1 2