Search:

Type: Posts; User: Silent Scone@ROG

Page 4 of 20 1 2 3 4 5 6 7

Search: Search took 0.02 seconds; generated 116095 minute(s) ago.

  1. What some users or v-bloggers deem excess voltage...

    What some users or v-bloggers deem excess voltage probably differs from Intel and board vendors, so you'd need to post what videos you're referencing. You can disable MCE and use the system at...
  2. List of ROG boards with REBAR Support for X299....

    List of ROG boards with REBAR Support for X299. The release for some of these updates are staggered. Some vendors are still to release VBIOS updates, too.

    ROG RAMPAGE VI EXTREME ENCORE 1003
    ROG...
  3. Good to hear, thanks for the feedback.

    Good to hear, thanks for the feedback.
  4. Thread cleaned. If posting findings from third...

    Thread cleaned. If posting findings from third party sources regarding behaviour in firmware, please be sure to state which board/UEFI revision and what those issues are. Posting things such as "I...
  5. Tab over to the Monitoring tab, you'll find this...

    Tab over to the Monitoring tab, you'll find this in the list of sensors. Set to ignore.
  6. As per the post above, the support pages will...

    As per the post above, the support pages will update periodically. These were simply posted here early, as a lot of users seem to appreciate the "first" mentality :D





    This is really...
  7. Replies
    2
    Views
    526

    https://rog.asus.com/forum/showthread.php?57038-Do...

    https://rog.asus.com/forum/showthread.php?57038-Don%92t-combine-memory-kits!-The-meat-and-potatoes-overview

    Have a read here.
  8. Try reseating the CPU. If this doesn't help, try...

    Try reseating the CPU. If this doesn't help, try POST with one DIMM inserted in the channel that's dropping.
  9. Hello, There should be a code on the Q-CODE...

    Hello,

    There should be a code on the Q-CODE LED when the system hangs on POST.
  10. Yes, pushing things to the limit is the...

    Yes, pushing things to the limit is the overclockers disposition, but there isn't much headroom here sadly. You can experiment with some third party tuning tools, however these often impact single...
  11. Hello, Overclocking on this platform is quite...

    Hello,

    Overclocking on this platform is quite limited. Enable DOCP and PBO and use the system as you intended. You can experiment with curve optimiser which can be found under the AMD Overclocking...
  12. Hello, overtemperature is based on TCASE...

    Hello, overtemperature is based on TCASE temperature. If your CPU is reaching 90C you need to evaluate your cooling, try reseating the cooler and check the pump is operational
  13. Hello, Q-Code 27 is reserved for CPU Post-Memory...

    Hello, Q-Code 27 is reserved for CPU Post-Memory Initialization.

    Remove the CPU and memory modules and reseat whilst checking for even mounting pressure.
  14. Hello, Please be sure to read the rules.

    Hello,


    Please be sure to read the rules.
  15. Most obvious thing to do in that situation is to...

    Most obvious thing to do in that situation is to roll back, if you haven't already.
  16. Replies
    1
    Views
    181

    Hi, PM me with the details of the account you...

    Hi, PM me with the details of the account you wish to be removed.
  17. It actually has everything to do with it, as the...

    It actually has everything to do with it, as the inductor noise is caused by current swing and interaction of certain components. Given the huge number of power supplies, graphics cards and various...
  18. Hello, HCI Memtest is not Memtest86, so we are...

    Hello,

    HCI Memtest is not Memtest86, so we are clear. Memtest86 doesn't test memory stability stringently enough to find anything past faulty modules.

    https://www.hcidesign.com/memtest/
  19. Hi, Prime and OCCT are quite power intensive...

    Hi,

    Prime and OCCT are quite power intensive and not the best methods for dialling out memory instability. Firstly, you want to run them with the memory and FCLK configuration at optimised...
  20. GPUTIII is currently in beta, you can provide...

    GPUTIII is currently in beta, you can provide feedback here in the beta participation section : https://discord.gg/7SDse2t
  21. Hi, feel free to participate in the GPUT3 beta...

    Hi, feel free to participate in the GPUT3 beta over on Discord.

    https://discord.gg/7SDse2t
  22. Hello, yes, when the system is overclocked,...

    Hello, yes, when the system is overclocked, depending on the system configuration the system may conduct multiple power cycles in order to complete POST.
  23. XMP or DOCP are predefined frequency, timings and...

    XMP or DOCP are predefined frequency, timings and voltage denoted by the memory vendor to offer users the best possible chance of stability. Different memory vendors use varying levels of guardband,...
  24. Hello, Yes memory instability can quite easily...

    Hello,

    Yes memory instability can quite easily cause driver crashes in this way.

    There likely wasn't any reason to RMA the memory. If using DOCP/XMP then the applied overclock wasn't stable and...
  25. Replies
    3
    Views
    493

    Hello, Try entering a manual value under the...

    Hello,

    Try entering a manual value under the AMD Overclocking Menu for PBO settings.
Results 76 to 100 of 500
Page 4 of 20 1 2 3 4 5 6 7