Search:

Type: Posts; User: XYchromosone

Page 1 of 10 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    14
    Views
    294

    VCCSA @ 1.36v is high... definitely go manual and...

    VCCSA @ 1.36v is high... definitely go manual and use lower voltages.

    Update: I didn't realize you are running Team Group Xtreem 4133 c18. This runs at a higher voltage than 1.35v when OCing. I've...
  2. have you tried a different connection from GPU to...

    have you tried a different connection from GPU to your monitor, such as DisplayPort or HDMI? It might be a graphics driver problem. Maybe try a previous version of the nvidia driver.
  3. I suggest to get a 10 K ohm thermister [the...

    I suggest to get a 10 K ohm thermister [the common PTC or "Positive Temperature Coefficient" type] and plug it in to a 2 pin extension heat sensor input on your mobo, which I would think actually has...
  4. Replies
    1
    Views
    136

    I guess you already know that 7A to 7F q codes...

    I guess you already know that 7A to 7F q codes are reserved for future AMI DXE codes. So that is of no real help here. What RAM voltage are you using? If it's from the XMP profile it would be 1.35V @...
  5. Thread: Bent pins

    by XYchromosone
    Replies
    9
    Views
    325

    I'm not sure how you're going to clean out the...

    I'm not sure how you're going to clean out the liquid metal? Actually you could use a suction tube that you could put together using a vacuum cleaner e.g. I've made one in the past by taping a length...
  6. My max XI code and extreme do not have the...

    My max XI code and extreme do not have the D.O.C.P. setting in the UEFI?

    Update: I thought you had an Intel mobo, it's AMD based hence why you have D.O.C.P. in the BIOS and my Intel CPU based mobo...
  7. @Falkentyne Yes i installed windows from...

    @Falkentyne
    Yes i installed windows from scratch on both systems. If i hadn't done that and i experienced such lag all the time the first thing i would do is reinstall Windows.

    @MrAgapiGC
    I...
  8. anyone else finding Maximus XI Code / Extreme sluggish?

    I've recently [regrettably] upgraded 2 systems from a Maximus X Hero to the Maximus XI Code and Extreme. Both systems are running quite slow compared to the previous hardware. opening Windows File...
  9. Thread: Bent pins

    by XYchromosone
    Replies
    9
    Views
    325

    I purchased a Maximus XI Code locally but I had...

    I purchased a Maximus XI Code locally but I had to leave it for about 2 months before I could use it for I had to go to hospital due to an illness. When I got to checkng out the mobo, it already had...
  10. try turning off the power from the wall socket to...

    try turning off the power from the wall socket to the psu for 30 seconds. Then see if it stops the boot-to-BIOS loop.
  11. there are so many members complaining about BIOS...

    there are so many members complaining about BIOS 1401 giving them problems. Yet 1302 is working ok for these members, so i understand. I guess ASUS engineers are working on this and hopefully come up...
  12. @tousmic88 Merci @mdzcpa Thank you

    @tousmic88
    Merci

    @mdzcpa
    Thank you
  13. @OldMike65, your input is appreciated, and...

    @OldMike65,

    your input is appreciated, and helps me to make a better decision on wheather to upgrade to the ks. I can use the K on another maximus xi code i have which is currently running an i7...
  14. The psu may still be the culprit even if the...

    The psu may still be the culprit even if the voltages are correct, it may be not able to put out enough current. And the kick start method mentioned does work under certain situations as explained by...
  15. members with Maximus XI upgraded from i9 9900k to i9 9900ks advice please

    Have you found it worth while upgrading from i9 9900k to ks refresh? I would like to know your thoughts / findings pro / cons guys, please try to keep it to owners of ROG Maximus XI series mobo....
  16. The latter is what I was referring to. You can...

    The latter is what I was referring to. You can not take a spontaneous BIOS snapshot during any kind of BIOS / POST routine, it has to be a SNAPSHOT of a pre-configured postable BIOS, once you're in...
  17. Replies
    48
    Views
    5,002

    the update BIOS 1401 has an update for the i9...

    the update BIOS 1401 has an update for the i9 9900ks CPU if you check out the changelog. It might be a good idea to update just for that reason alone. My system max xi extreme is running good with...
  18. Replies
    9
    Views
    203

    will throwing a couple extra prawns on the...

    will throwing a couple extra prawns on the barbie, do it for you? lol
  19. you can get a full picture of all BIOS ...

    you can get a full picture of all BIOS parameters and their value by saving the BIOS configuration as a text file, on a USB stick plugged in a USB port. By memory I believe the utility is under...
  20. Replies
    9
    Views
    203

    I second that, it's an important point to have a...

    I second that, it's an important point to have a PSU that works at its most efficient wattage output which on average I think is as per your 60% value. Of course you need to consider its efficiency...
  21. Replies
    9
    Views
    203

    i'd say if you are only upgrading your cpu to a...

    i'd say if you are only upgrading your cpu to a i9 10940X [it's a 165w unit] then a 750w psu should be ok considering your other components. However, It might be considered bear minimal, though.
  22. Replies
    1
    Views
    140

    You need to redo the overclock exactly as you did...

    You need to redo the overclock exactly as you did with the previous BIOS. That should do it.
  23. Replies
    1
    Views
    113

    when you say "when i boot to the system" do you...

    when you say "when i boot to the system" do you mean in the BIOS or system as in windows? if it is windows, what are you using to read the voltages? If it's the bios, do you mean the voltage read out...
  24. Replies
    5
    Views
    244

    si, puoi farlo così nel BIOS. Yes you can do it...

    si, puoi farlo così nel BIOS. Yes you can do it like that in the BIOS. Use the AI OC utility, it will ask you a few questions about the cooling system you are using, and what you are going to use the...
  25. it was my pleasure to help. BTW the boot...

    it was my pleasure to help.

    BTW the boot screen that announced the % of the OC is normal when you choose to use the automatic tuning feature in the BIOS and no multi reboots are usually required...
Results 1 to 25 of 237
Page 1 of 10 1 2 3 4