Search:

Type: Posts; User: Silent Scone@ROG

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Hello, This is unfortunately what is refered...

    Hello,

    This is unfortunately what is refered to as a how long is a piece of string question. It really depends on the title in question as SLI is currently being phased out by NVIDIA, and support...
  2. Replies
    4
    Views
    136

    Hello, This prompt can often happen unprompted...

    Hello,

    This prompt can often happen unprompted due to system instability. If it persists, you may want to either revert to stock or test both CPU and memory stability independantly.
  3. Best results are obviously still found with a...

    Best results are obviously still found with a ratio of 1:1 for FCLK. Many CPUs will not be able to run 3800MHz at 1:1. Moreover, those modules might not be able to do CAS 14 on that platform at that...
  4. Hello, I've no problems on this UEFI or...

    Hello,

    I've no problems on this UEFI or previous builds with my personal setup. Have just flashed to 2311 and reinstated previous memory settings.
  5. Hello, can I ask why you're using a positive...

    Hello, can I ask why you're using a positive offset?

    If setting the desired value in Additional Turbo Voltage is above the minimum VID, there is no need to apply an offset as this is not true...
  6. Replies
    2
    Views
    159

    Hello, Are the reviewers testing idle power at...

    Hello,

    Are the reviewers testing idle power at the same refresh and resolution as you? If they are not, that likely answers your question :)
  7. Hello, The memory training was failing and...

    Hello,

    The memory training was failing and reattempting to train before entering safe mode. Flashing the UEFI to a new revision has resulted in your defined settings being more stable than on the...
  8. Replies
    3
    Views
    271

    Hello, post moved to service inquiries.

    Hello,

    post moved to service inquiries.
  9. I've moved the post to ASUS Software for the best...

    I've moved the post to ASUS Software for the best chance of response.

    Depending on which method was used to reset Windows, and considering the issue began when enabling NVIDIA specific...
  10. I would fully expect refresh boards to come with...

    I would fully expect refresh boards to come with a compatible UEFI, however existing boards will likely need flashback.
  11. Replies
    88
    Views
    11,810

    Hello, Your post was likely moved to service...

    Hello,

    Your post was likely moved to service for their attention. Might want to tone down the insults, profanity is another reason why posts would be removed.
    ...
  12. Hello, as far as I'm aware overtemperature is...

    Hello, as far as I'm aware overtemperature is based on T-CASE readings. If you're hitting an over temperature, it might be an idea to dial back.
  13. Hello, Remove the cooler and CPU whilst...

    Hello,

    Remove the cooler and CPU whilst checking for any bent socket pins. If ok, reseat and check for even mounting pressure. Be sure to follow the correct procedure for CPU mounting.

    You may...
  14. Thank you. I've moved this thread for attention...

    Thank you. I've moved this thread for attention of service.
  15. Replies
    7
    Views
    243

    A decent OE 750 to 850W should be more than...

    A decent OE 750 to 850W should be more than sufficient with headroom to spare on that setup.
  16. Hello, Try using the latest version of GPU...

    Hello,

    Try using the latest version of GPU Tweak II if you haven't done so already. If you're also able to provide a dxdiagnostics file that would also be helpful for replication.
  17. Hello, Are you able to upload a DXdiagnostic?...

    Hello,

    Are you able to upload a DXdiagnostic? In which position is the BIOS switch when this occurs?

    Thanks.
  18. Replies
    3
    Views
    121

    1.3v -1.35v is ok if not running heavy AVX...

    1.3v -1.35v is ok if not running heavy AVX workloads. For a gaming system, these manual voltages are fine on this platform. You can experiment with per CCX overclock if wanting to explore higher...
  19. Excellent work and keen eye, look forward to...

    Excellent work and keen eye, look forward to seeing the final result!
  20. Hello, No, the memory IC type will not help...

    Hello,

    No, the memory IC type will not help you obtain higher core clocks. It isn't likely to make any difference at all.
  21. Please remember that manual tuning of VSOC can be...

    Please remember that manual tuning of VSOC can be required depending on the strength of the memory controller. Most samples will operate within the range of 1.00 to 1.15v.
  22. The nature of updating firmware really lends...

    The nature of updating firmware really lends itself to integral tools like EZ Flash and USB Flashback. There's no need to use AI Suite for this function, nor would I recommend it.
  23. Hello, Those values are ok for this platform...

    Hello,

    Those values are ok for this platform and are as such to accommodate CPU with weak memory controllers. If you wish to tune these values to the capability of your CPU, you can do so.
  24. Please do not post GPU related discussion in...

    Please do not post GPU related discussion in general. There is a clear section for NVIDIA GPU discussion available.
  25. Please try the method posted above.

    Please try the method posted above.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4