Search:

Type: Posts; User: Braegnok

Page 1 of 9 1 2 3 4

Search: Search took 0.01 seconds.

  1. I received memory this afternoon, tested OK. ...

    I received memory this afternoon, tested OK.

    Got the mora 420 lines ran into chassis, installed manifold. will start installing blocks/tubing tonight.

    Went with BartXstore copper heatshields...
  2. Thanks Webster, I received the M13A board last...

    Thanks Webster,

    I received the M13A board last week, should have Hynix 5333MHz memory kit this afternoon.

    90231


    DHL Express tracking shows my Hynix kit is out for delivery, looking...
  3. Replies
    8
    Views
    380

    First try to re-tap the stripped threads with a...

    First try to re-tap the stripped threads with a tap & die after removing it from your board, you may need to drill one size up from original threads, and just get a new screw from the hardware...
  4. PM sent. Also I have another work around worth...

    PM sent.

    Also I have another work around worth testing, it requires you to install Linux on a drive, can use a flashdrive.

    Running Linux OS you can use nvidia-smi commands and a script to set a...
  5. Glad to help, You might have an option to fix...

    Glad to help,

    You might have an option to fix the power issue using Nvidia NVFlash. Flash cards with Compatible, Verified micro code/bios or contact Asus Engineer about writing a new bios for...
  6. Can you check your Nvidia Control Panel settings,...

    Can you check your Nvidia Control Panel settings, Manage 3D Settings, than open Global Settings, scroll down to Power Management mode, and confirm "Prefer maximum performance" is set, and OpenGL...
  7. I would try Afterburner, see if you can remove...

    I would try Afterburner, see if you can remove performance limits, and adjust power limit.

    You will need the newest Afterburner 4.6.4 Beta 3 Version. And turn the power selection on in the...
  8. OK,.. Your system info during the Time Spy run...

    OK,..
    Your system info during the Time Spy run is on the right, mine is on the left running default settings.

    89944

    Compairing power consumption during the run,.. seems your cards are drawing...
  9. Hello NeoXanthus, I have a few more questions...

    Hello NeoXanthus,

    I have a few more questions that might help us figure this out.

    Please list your power supply, how old is your power supply, are you using Nvidia OEM 12-pin power cables with...
  10. That is vary strange indeed, your system should...

    That is vary strange indeed, your system should be getting 30K + graphics score with SLI 3090 4.0 X 16 configuration.

    The graphics score weight, equal to 0.85 and the CPU score weight, equal to...
  11. Thanks NeoXanthus, Having the detailed scores,...

    Thanks NeoXanthus,

    Having the detailed scores, settings helps. I only notice few things that could be causing an SLI performance hit, your system memory speed, memory timings impact your...
  12. I would need to see the link to the result for...

    I would need to see the link to the result for the SLI 3090 Time Spy run to say exactly what the issue is. Need the Detailed Scores, Settings, and Run Details.

    Based on information in the screen...
  13. Currently Z590 motherboard is the only system...

    Currently Z590 motherboard is the only system that I am aware of that is listed to run that kit @ 5066MHz.

    Not knowing exactly which Motherboard, CPU or any system specs you have, it is difficult...
  14. Hello Assyrian, Please shut-down your PC before...

    Hello Assyrian, Please shut-down your PC before 'reseating' your M.2 drive.

    Most likely your motherboard's factory M.2 connector is not designed to support hot swap, without electrically damaging...
  15. Replies
    4
    Views
    337

    For both motherboards listed above, and 5900X...

    For both motherboards listed above, and 5900X chip you should be plug & play with Corsair CMK64GX4M2D3600C18....
  16. Replies
    701
    Views
    133,498

    Nowadays I only update my BIOS if the new version...

    Nowadays I only update my BIOS if the new version contains an improvement I need, generally the newer versions do not add new features I need.

    Back when I was running 2x8GB kits, and overclocking...
  17. Replies
    701
    Views
    133,498

    I noticed instability running 2002 or 2004 using...

    I noticed instability running 2002 or 2004 using my old OC settings from 0804, 0901,.. as system needed more voltage and my board did not train memory as well with the newer BIOS. I could still get...
  18. Replies
    701
    Views
    133,498

    With i9-10900K chip and XII board, I recommend...

    With i9-10900K chip and XII board, I recommend BIOS 1003. I have similar hardware as you, and 1003 works best on my hardware vs any newer version.

    89803
  19. Hello, Read this DDR4 OC Guide....

    Hello,

    Read this DDR4 OC Guide. https://github.com/integralfx/MemTestHelper/blob/oc-guide/DDR4%20OC%20Guide.md

    The guide covers Setup, General RAM Info, Expectations/Limitations, and than...
  20. Replies
    5
    Views
    519

    I agree it looks like Nvidia 4-slot,.. ? 89750...

    I agree it looks like Nvidia 4-slot,.. ?

    89750

    The egg has the Crosshair VIII Extreme in stock $799.99, It is a sweet looking board.
  21. Asus new releases is showing Launch Date as...

    Asus new releases is showing Launch Date as 9/30/2021. https://airtable.com/shrkKVIhaEEGbYsbu/tblxTA8JhWMXG4sc2
  22. You might consider AMD X570 Motherboard, 12-Core...

    You might consider AMD X570 Motherboard, 12-Core 5900X Vermeer CPU.

    Asus Crosshair VIII Extreme. https://rog.asus.com/motherboards/rog-crosshair/rog-crosshair-viii-extreme-model/spec

    AMD Ryzen...
  23. Generally the reason why the blank icons appear...

    Generally the reason why the blank icons appear on the desktop is because the icon cache is corrupted. Most likely caused by an improper shutdown, but could also be due to viruses or malware, it's...
  24. To the best of my knowledge PLL OC skews the DTS...

    To the best of my knowledge PLL OC skews the DTS sensors calibration. This setting is used for sub-zero bench runs to help booting your system. PLL Bandwidth seems to be linked to VDDQ (DDR memory)...
  25. Glad to help, have some fun putting some juice on...

    Glad to help, have some fun putting some juice on that new 11900K.

    Post some bench results after you get everything dialed in.
Results 1 to 25 of 214
Page 1 of 9 1 2 3 4